Abstract:Ti2AlC and Ti3AlC formed by the reaction between C and TiAl alloy can improve the plasticity and strength of TiAl alloy respectively. Generally, the peritectic reaction of L + TiC→Ti2AlC (Ti3AlC) occurs in the process of liquid-phase sintering, but different formation mechanisms of Ti2AlC and Ti3AlC may exist in the solid-state sintering. In this work, multilayer graphene is employed to fabricate the reaction interface with TiAl alloy under 1100–1350 ℃, which is the common solid-state sintering temperature of TiAl alloy. According to the microstructure characterization and analysis, Ti2AlC and Ti3AlC are verified to contain no TiC. The interface energy values of TiC/TiAl, Ti2AlC/TiAl and Ti3AlC/TiAl are calculated to be about 1.2, 0.87 and 0.39 J·m2, respectively, indicating that Ti2AlC and Ti3AlC can be formed directly without TiC mesophase. Besides, only Ti2AlC is observed to be formed at 1150–1250 ℃, while the interface products at 1250–1350 ℃ change into Ti3AlC with a small amount of Ti2AlC. The mechanism that the sintering temperature affects the formation tendency of Ti2AlC and Ti3AlC can be ascribed to the content of α phase. The TiAl alloy matrix is composed of γ and a few α phases at 1150–1250℃, but almost completely transforms into α phase at 1250–1350 ℃, and the increase in the α content can promote the formation of Ti3AlC. The above results demonstrate the possibility of regulating the relative content of Ti2AlC and Ti3AlC through controlling the sintering temperature, which provides a promising method to improve the plasticity and strength of TiAl alloy.

Formation mechanism of Ti3AlC2 in TiO2–Al–C/TiC systems at high temperatures

Growth Kinetics of TiAl3 Layer in Multi-Laminated Ti–(TiB2/Al) Composite Sheets During Annealing Treatment

A possible mechanism on synthesis of Ti3AlC2

Structure Formation in the Combustion Synthesis of Al2O3–TiC Composites

Formation Mechanisms of Ti2AlC and Ti3AlC During Solid-State Sintering Between Multilayer Graphene and TiAl Alloy Composite

Formation of TiC/Ti 2 AlC and Α 2 +γ in In-Situ TiAl Composites with Different Solidification Paths

Preparation of Ti3AlC2 and Ti2AlC by self-propagating high-temperature synthesis and study on the reaction mechanism

Combustion synthesis of ternary carbide Ti3AlC2 in Ti–Al–C system

Effects of different Al contents on combustion synthesis of Ti3AlC2 powders in the Ti-Al-C system

Microstructure Evolution of Ti-Al-C System Composite

Effect of Combustion Temperature on Combustion Synthesis of Ti3AlC2 and Ti2AlC

Effects of different Ti/C and Al contents on combustion synthesized Ti3AlC2 powders in the Ti-Al-C system

Combustion Synthesis and Thermal Stability of Ti3AlC2

A novel simple method to stably synthesize Ti3AlC2 powder with high purity

In-situ TiC/Ti composites based on Ti 2 AlC–Ti system: Reaction process, microstructure, and mechanical properties

Reaction synthesis of Al/TiC composites and the effect of Al content

Synthesis Mechanism of TiC Particles in Preparation of AlTiC Intermediate Alloys

Synthesis of C F /tial 3 Composite by Infiltration-In Situ Reaction

TiC phase in Ti alloys at different temperatures

Effects of TiAl3 addition on combustion synthesis of Ti3AlC

The Reaction Between Ti3AlC2 and Cu in the Synthesis Process of Cu/Ti3AlC2 Composites