Abstract:Based on the improvement of the phase transition temperature of Ti by Al element and the excellent strengthening effect of TiC particles, this paper selects Ti 2 AlC as the precursor, striving to improve the high-temperature performance of the Ti matrix. The composites with 1–10 vol% Ti 2 AlC addition were fabricated by hot-pressing sintering. And a detailed study was conducted on the reaction process, microstructure, room and high temperature compression properties of the composites. The experimental results show that the separation of Al elements at the A-position occurs at around 700 °C in Ti 2 AlC, and the Al element is homogenized in the matrix during the subsequent sintering process. Micron sized TiC particles are mainly distributed at the Ti grain boundaries, while the content of sub-micron sized TiC particles entering the crystal increases with the increasing Ti 2 AlC addition. The interface mismatch between TiC and Ti is small, and the bonding is well. These microstructures enable composite materials to exhibit excellent mechanical properties, with 10 vol% Ti 2 AlC/Ti composite having a yield strength of 1858 MPa and an ultimate strength of 2200 MPa at room temperature, and maintaining a yield strength of 602 MPa and an ultimate strength of 1264 MPa at 500 °C.

The reaction between Ti3AlC2 and Cu in the synthesis process of Cu/Tl3AlC2 composites

The Reaction Between Ti3AlC2 and Cu in the Synthesis Process of Cu/Ti3AlC2 Composites

The Reaction between Ti<sub>3</sub>AlC<sub>2</sub> and Cu in the Synthesis Process of Cu/Ti<sub>3</sub>AlC<sub>2</sub> Composites

Reaction synthesis of Al/TiC composites and the effect of Al content

Experimental study on reaction synthesis of TiC in Al-Ti-C system

Fabrication and Properties of Ti3AlC2 Particulates Reinforced Copper Composites

Study on synthesis of TiC in Al/TiC composite materials

Synthesis of C F /tial 3 Composite by Infiltration-In Situ Reaction

Formation mechanism of Ti3AlC2 in TiO2–Al–C/TiC systems at high temperatures

Study of the Synthesis Process of Non-Stoichiometric TiC in Cu-Ti Melts

Microstructure and property of Al/TiC composites prepared by reaction synthesis

Physical, mechanical, and ablation properties of Cu–Ti3AlC2 composites with various Ti3AlC2 contents

Preparation and characteristics of Ti3AlC2 -Al3Ti/Al composite materials synthesized from pure Al and Ti3AlC2 powders

In-situ TiC/Ti composites based on Ti 2 AlC–Ti system: Reaction process, microstructure, and mechanical properties

Reactive Synthesis of Polycrystalline Ti3AlC2 and Its Sintering Behavior

A synthesis method of Ti3AlC2 ceramic

Preparation of Ti3AlC2 and Ti2AlC by self-propagating high-temperature synthesis and study on the reaction mechanism

Synthesis Mechanism of TiC Particles in Preparation of AlTiC Intermediate Alloys

Reaction mechanism and microstructure evolution of superhigh strength in-situ TiC/Ti composite based on Cr 2 AlC-Ti system

Effects of TiAl3 addition on combustion synthesis of Ti3AlC

A possible mechanism on synthesis of Ti3AlC2