Abstract:In this study, it was verified that the synthesis of a Ti‐Al‐C MAX phase has advantages when using intermetallic compounds rather than using only elemental powders. The formation behavior of the MAX phase was presented through diffusion experiments. In the case of using elemental powder, Ti2AlC is produced at 1,300°C, and Ti3AlC2 is produced at 1,400°C. When intermetallic compounds are used, Ti2AlC is produced at 1,000°C, and Ti3AlC2 is produced at 1,300°C. In the case of the elemental powder, it is verified that Ti3AlC2 content is decreased and Ti2AlC is increased when heat treatment is performed at 1,400°C for 3 h. Rather Ti3AlC2 content is increased when intermetallic compounds are used. When an intermetallic compound is used, synthesis occurs more actively at high temperatures, and the tendency to be thermally decomposed can be prevented. When TiAl and TiC are heat treated, Al of the intermetallic compound is diffused into TiC, and C of TiC is diffused into the intermetallic compound. Furthermore, there are many two‐dimensional defects in TiAl, which act as a C diffusion channel. C diffuses into TiAl to produce TiCX, and the MAX phase is generated by the short‐range diffusion of Al. In the case of TiC, TiC transform into TiCX after C diffuses into TiAl, which consequently structure of TiC changes from Cubic to Hexagonal. This is the same crystal structure as the MAX phase, and it is confirmed that the (110) surface is maintained. A Ti‐C layer structure of the (110) surface is maintained, and it was determined that Al is diffused during this time to generate MAX phase. This article is protected by copyright. All rights reserved

(Cr2/3Ti1/3)3AlC2 and (Cr5/8Ti3/8)4AlC3: New MAX‐phase Compounds in Ti–Cr–Al–C System

Ti 5 Al 2 C 3: A new ternary carbide belonging to MAX phases in the Ti - Al - C system

Synthesis and Reaction Path of Ti‐Al‐C MAX Phase by Reaction with Ti‐Al Intermetallic Compounds and TiC

Preparation and performance of MAX phase Ti3AlC2 by in-situ reaction of Ti-Al-C system

Theoretical Prediction and Synthesis of (Cr 2/3 Zr 1/3 ) 2 AlC i -MAX Phase

The Elusive member of the Ti-Al-C MAX family- Ti4AlC3

Enhanced yield synthesis of bulk dense (M2/3Y1/3)2AlC (M = Cr, W, Mo) in-plane chemically ordered quaternary atomically laminated i-MAX phases and oxidation of (Cr2/3Y1/3)2AlC and (Mo2/3Y1/3)2AlC

Pressureless manufacturing of high purity Ti3AlC2 MAX phase material: Synthesis and characterisation

High entropy six-component solid solution (Ti0.5Nb0.15Zr0.1Mo0.1Ta0.1W0.05)2AlC: A novel synthesis approach and its mechanical properties

A possible mechanism on synthesis of Ti3AlC2

Synthesis of Ti2(In Al1-)C (x = 0–1) solid solutions with high-purity and their properties

Synthesis, properties and thermal decomposition of the Ta4AlC3 MAX phase

Crystal Structure and Elastic Properties of Hypothesized MAX Phase-like Compound (Cr2Hf)2Al3C3

Synthesis of MAX Phases in the Ti2AlC–V2AlC System as Precursors of Heterometallic MXenes Ti2 – xVxC

Synthesis of Ti3(SnxAl1−x)C2 solid solutions over the whole composition range

Formation of M N +1 AX N Phases in Ti–Cr–Al–C Systems by Self-Propagating High-Temperature Synthesis

On the stochastic phase stability of Ti2AlC-Cr2AlC

Microstructure and Oxidation Behaviors of (TiVCr)2AlC MAX-Phase Coatings Prepared by Magnetron Sputtering

In-situ TiC/Ti composites based on Ti 2 AlC–Ti system: Reaction process, microstructure, and mechanical properties

Synthesis of low-cost Ti3AlC2-Ti2AlC dual MAX phase with high-electrical conductivity using economical raw materials and novel compositions

Mechanical and Oxidation Behavior of Textured Ti2AlC and Ti3AlC2 MAX Phase Materials