Abstract:Ceramics including oxides, carbides, nitrides, borides, carbonitrides, silicates, and MAX phases have wide applications in electrode materials, high-temperature structural materials, and anticorrosive materials for harsh environments. However, the difficulty in processing ceramics with complex shapes from green powders has been restricting applications in emerging areas. Herein, polymer-derived ceramics (PDCs) were used to assist the pressureless processing of MAX phase particles. The processing temperature could be lowered by 400 to 600 °C, which is favorable for both industrialization and engineering applications. The good processability of MAX-preceramic polymer mixtures and high accuracy of replica from preceramic polymer make it possible to fabricate artificial objects with complex shapes and fine texture. This method provides a method to fabricate MAX phase ceramics/composites, as well as some other ceramics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22289?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22289</a>.SEM images of Ti3AlC2 particles after ball-milling, TGA curve of PD4 in nitrogen, X-ray diffraction patterns of the samples with different Ti3AlC2 content, the fracture surfaces of Ti3AlC2–SiOC samples, TGA curve of 60%Ti3AlC2–PD4 in argon, SEM of the MAX-PD4 composite before heat treatment, HRTEM and line scanning of Ti3AlC2–SiOC, Vickers' hardness of Ti3AlC2–SiOC, and the flexural strength of Ti3AlC2–SiOC (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22289/suppl_file/am0c22289_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Mechanical and Oxidation Behavior of Textured Ti2AlC and Ti3AlC2 MAX Phase Materials

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Surface Characterization of Thermally Oxidized Titanium Alloys

Microstructure and mechanical properties of textured high‐entropy M4AlC3/Al2O3 (M = Ti, V, Mo, Nb, Ta) composites

Microstructural and compositional design of Cr2AlC MAX phases and their impact on oxidation resistance

Processing and Mechanical Properties of Ti<sub>2</sub>AlC MAX Phase Reinforced AE44 Magnesium Composite

Preparation and performance of MAX phase Ti3AlC2 by in-situ reaction of Ti-Al-C system

Effect of oxygen substitution and oxycarbide formation on oxidation of Ti3AlC2 MAX phase

Microstructure and Oxidation Behaviors of (TiVCr)2AlC MAX-Phase Coatings Prepared by Magnetron Sputtering

Mechanical Characterisation of the Protective Al$_2$O$_3$ Scale in Cr$_2$AlC MAX phases

Textures of Rectangular Extrusions and Their Effects on the Mechanical Properties of Thermo-Mechanically Treated, Lamellar Microstructure, Ti–47Al–2Cr–2Nb–0.15B

A theoretical investigation of the effect of Ga alloying on thermodynamic stability, electronic-structure, and oxidation resistance of Ti2AlC MAX phase

MAX Phase Ceramics/Composites with Complex Shapes

Anisotropic microstructures and mechanical properties of textured Ti3AlC2/TiAl3/Al composite

Synthesis and Reaction Path of Ti‐Al‐C MAX Phase by Reaction with Ti‐Al Intermetallic Compounds and TiC

Synthesis and electromagnetic wave absorption performances of a novel (Mo0.25Cr0.25Ti0.25V0.25)3AlC2 high-entropy MAX phase

Microstructure evolution during oxidation of quinary Ti 3 (AlSiSn)C 2 at high temperatures and induced probable performance

Pressureless manufacturing of high purity Ti3AlC2 MAX phase material: Synthesis and characterisation

Effect of Ti3AlC2 particles on microstructure and tribological properties of micro-arc oxidation layer on TC4 alloy

Insights into High Temperature Oxidation of Al2O3-forming Ti3AlC2

High entropy six-component solid solution (Ti0.5Nb0.15Zr0.1Mo0.1Ta0.1W0.05)2AlC: A novel synthesis approach and its mechanical properties