Abstract:Oxidation resistance of titanium aluminide (TiAl) based alloys is a fundamental aspect for the high-temperature structural applications such as in the advanced hypersonic aircraft engines and gas turbines. The aim of this study was to identify oxidation kinetics and mechanisms through detailed microstructural characterization of a newly-developed Ti-44Al-4Nb-1.5Cr-0.5Mo-0.1B-0.1Y alloy via focused ion beam (FIB), transmission electron microscopy (TEM), X-ray diffraction (XRD), electron probe microanalysis (EPMA), scanning transmission electron microscopy (STEM), along with density functional theory (DFT) calculations. The alloy consisting mainly of γ-TiAl/α2-Ti3Al lamellar structure exhibited a superior oxidation resistance at 700 °C, and followed parabolic oxidation kinetics at 800 °C and 900 °C. The observed multi-layered scale structure consisted of TiO2, Al2O3-rich, Al2O3+TiO2, H-Ti2AlN+Al2O3+α2-Ti3Al, Z-Ti5Al3O2+AlNb2+Laves-(Ti,Nb)Cr2, and H-Ti2AlN/α2-Ti3Al lamellae from the outside to inside after high-temperature oxidation. The γ-TiAl/α2-Ti3Al lamellae near the scale/substrate interface were first transformed into H-Ti2AlN/α2-Ti3Al lamellae, with orientation relationships identified as ( 0001 ) α 2 / / ( 0001 ) T i 2 A l N , ( 10 1 ¯ 0 ) α 2 / / ( 10 1 ¯ 0 ) T i 2 A l N and [ 1 2 ¯ 10 ] α 2 / / [ 1 2 ¯ 10 ] T i 2 A l N . The H-Ti2AlN/α2-Ti3Al lamellae were then transformed into a metastable Z-Ti5Al3O2 phase at the scale/substrate interface. The Z-phase was decomposed to Ti3Al and Al2O3 as the scale/substrate interface moved inwardly. Ti3Al reacted further with oxygen and nitrogen to form Ti2AlN, which was finally oxidized to form TiO2 and α-Al2O3. A Nb-rich layer was present beneath the scale along with the formation of AlNb2 and Laves phase, and the doping effect of Nb to suppress the diffusion of oxygen occurred mainly in the TiO2+Al2O3 compound layer. The results obtained in this study would pave the way for the development of advanced oxidation-resistant TiAl-based materials for high-temperature applications.

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Surface Characterization of Thermally Oxidized Titanium Alloys

Oxidizing Characteristics and Oxide Formation of V-4cr-4ti Alloy

Non-Isothermal Oxidation Behaviors and Mechanisms of Ti-Al Intermetallic Compounds.

High-Temperature Oxidation Kinetics and Behavior of Ti–6Al–4V Alloy

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

Non-isothermal Oxidation Characteristic of Titanium-Aluminium Intermetallic Alloys

Initial Oxidation Behavior in Air of TiAl-2Nb and TiAl-8Nb Alloys Produced by Electron Beam Melting

Oxidation behavior of Ti-Nb-Mo-Al-Six refractory high entropy alloy at 1000°C

Influence of Thermal Oxidation Temperature on the Microstructural and Tribological Behavior of Ti6Al4V Alloy

Microstructural evolution and high-temperature oxidation mechanisms of a titanium aluminide based alloy

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

Thermodynamic and microstructural study of Ti2AlNb oxides at 800 °C

High-Temperature Oxidation of NbTi-Bearing Refractory Medium- and High-Entropy Alloys

High-Temperature Oxidation Resistance of High-Nb TiAl-Based Alloy

High-temperature oxidation behaviour of laser in situ synthesised Ti-Al-Cr-Nb alloy coating on Ti-6Al-4V

OXIDATION MECHANISM OF BINARY Ti-Al ALLOYS AT ELEVATED TEMPERATURE

Effect of Nb on the High Temperature Oxidation of Ti–(0–50 At.%)al

Non-Isothermal Oxidation Behavior and Mechanism of a High Temperature Near-α Titanium Alloy

Thermodynamic aspects of oxidation for Nb alloying gamma-TiAl intermetallic compounds

Effect of Temperature on Thermal Oxidation Behavior of Ti-6Al-4V ELI Alloy