Abstract:To investigate the microstructural evolution during high temperature oxidation, Cr-coated Zr-4 alloy specimens are prepared by multi-arc ion plating and high temperature oxidation tests are carried out under 1000°C, 1100°C and 1200°C in air atmosphere. Cr2O3 layers are formed on the surface after high temperature oxidation test. However, the thickness of Cr2O3 layer does not depend monotonously on the oxidation temperature. The oxidation temperature increases from 1000°C to 1100°C, the thickness of Cr2O3 layer increases from 2.35 μm to 5.74 μm, while the thickness is only 4.1 μm when the oxidation temperature is 1200°C. This is mainly due to the reduction of Cr2O3 to Cr, and oxygen diffuses into the substrate to form α-Zr. The oxidation weight gain for the three temperatures conforms to an exponential function, while the thickness of the Cr-Zr diffusion layers follows a linear relationship with the oxidation temperature. Regarding the Zr-4 alloy substrate, the Zr grains grow up and gradually change from elongated grain parallel to the interface to elongated grain along normal direction after high temperature oxidation. Moreover, different oxidation temperatures bring distinct recrystallization energy to Zr grains, and the defects and dislocations produced during the recrystallization of Zr grain are unequal. The kernel average misorientation values obtained from EBSD indicate that the overall density of defect and dislocation of Zr grains after high temperature oxidation under 1100°C is higher than the other two temperatures, while Zr grains after high temperature oxidation under 1000°C has the highest local density of defect and dislocation. The investigation in this study attempts to reveal the microstructure evolution of Cr coating and Zr-4 substrate during the high temperature oxidation. These results give some new perspectives on understanding the performance of Cr-coated Zr-4 alloy under high temperature environment.

Oxidizing Characteristics and Oxide Formation of V-4cr-4ti Alloy

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Surface Characterization of Thermally Oxidized Titanium Alloys

High Temperature Oxidation Behavior of Co-20Re-25Cr-2Si Alloy at Different Oxygen Pressures

Oxidation Behavior of Quaternary Co-20Re-25Cr-3Si Alloy at Laboratory Air

High-Temperature Oxidation Kinetics and Behavior of Ti–6Al–4V Alloy

High Temperature Oxidation and Wear Behaviors of Ti-V-Cr Fireproof Titanium Alloy

Non-isothermal Oxidation and Ignition Prediction of Ti-Cr Alloys

Non-Isothermal Oxidation Behaviors and Mechanisms of Ti-Al Intermetallic Compounds.

Non-isothermal Oxidation Characteristic of Titanium-Aluminium Intermetallic Alloys

Isothermal Oxidation Property of the Al2tio5/Tio(2)/Zro(2) Composite Coating on Tc4 Alloy Prepared by Micro-Arc Oxidation

Oxidation behavior of multi-component Ta–W–Al–Ti alloy at 1173 K

High Temperature In-situ X-ray Diffraction Study of the Oxidation of the Ti3Al Based Alloys

High temperature oxidation behaviour of a fire-resistant titanium alloy

High temperature oxidation behavior of a novel Ni-Cr-W-Al-Ti superalloy

Enhancing High-Temperature Oxidation Resistance of Ti6Al4V Alloy by Simple Surface Aluminization

Microstructural evolution of Cr-coated Zr-4 alloy prepared by multi-arc ion plating during high temperature oxidation

Oxidation Behaviors of FeCrNiAl High Entropy Alloy and Its Microstructure Evolution

Isothermal oxidation resistance and microstructure evolution of VPS-TiAlCrY coating on TiAl single crystals at 1100-1200 o C

Unraveling the Origin of the Excellent High-Temperature Oxidation Resistance of an AlCrFeNiTi Complex Concentrated Alloy

Characterization of Oxide Layers on Ti–2Al–2.5Zr and Ti–4Al–2V Alloys Oxidized at 300 °C in a Neutral Water Steam