Abstract:The oxidation behavior of titanium-tantalumalloys was investigated with respective concentrationsof each element ranging from 0 to 100 wt.%. Alloys wereexposed to argon-20% oxygen at 800 to 1400°C. Theslowest oxidation rates were observed in alloys with5-20% Ta. The oxidation kinetics of alloys containingless than approximately 40% Ta were approximatelyparabolic. Pure Ta exhibited nearly linear kinetics. Alloys containing 50% or more Taexhibited paralinear kinetics. The activation energiesfor oxidation ranged between 232 kJ/mole for pure Ti and119 kJ/mole for pure Ta, with the activation energies of the alloys falling between these values andgenerally decreasing with increasing Ta content. Theactivation energies for oxidation of the end members, Tiand Ta, agree well with published values for the activation energies for diffusion of oxygenin α-Ti and Ta. Scale formation in the alloys wasfound to be complex exhibiting various layers of Ti-,Ta-, and TiTa-oxides. The outermost layer of the oxidized alloys was predominately rutile(TiO2). Beneath the TiO2 grew avariety of other oxides with the Ta content generallyincreasing with proximity to the metal-oxide interface.It was found that the most oxidation-resistant alloys hadcompositions falling between Ti5Ta andTi-15Ta. Although Ta stabilizes the β-phase of Ti,the kinetics of oxidation appeared to be rate limited byoxygen transport through the oxygen-stabilized α-phase.However, the kinetics are complicated by the formationof a complex oxide, which cracks periodically. Tantalumappears to increase the compositional range ofoxygen-stabilized α-phase and reduces both the solubilityof oxygen and diffusivity of Ti in the α- andβ-phases.

Oxidation behavior of multi-component Ta–W–Al–Ti alloy at 1173 K

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Oxidizing Characteristics and Oxide Formation of V-4cr-4ti Alloy

Oxidation Mechanism of Three Fe-Al Alloys with and Without Addition of 0.1 At% Yttrium at 800 °C

Effect of Ti and Ta content on the oxidation resistance of Co-Ni-based superalloys

Insights into the Role of W/B Alloying on High-Temperature Oxidation Behavior of Ti42Al5Mn Alloy

High-temperature Oxidation Behaviour of SPS-prepared Mo and Mo–5Ta Alloys

Non-Isothermal Oxidation Behaviors and Mechanisms of Ti-Al Intermetallic Compounds.

High-Temperature Oxidation Kinetics and Behavior of Ti–6Al–4V Alloy

Non-isothermal Oxidation Characteristic of Titanium-Aluminium Intermetallic Alloys

Oxidation and mechanical behavior of intermetallic alloys in the TiNbAl ternary system

High-Temperature Oxidation Resistance of High-Nb TiAl-Based Alloy

Composition Dependence of the Kinetics and Mechanisms of Thermal Oxidation of Titanium-Tantalum Alloys

OXIDATION MECHANISM OF BINARY Ti-Al ALLOYS AT ELEVATED TEMPERATURE

Insight into the Ta alloying effects on the oxidation behavior and mechanism of cast TiAl alloy

Microstructure Evolution and Oxidation Mechanism of Ta5 Titanium Alloy During High-Temperature Heat Treatment

High Temperature In-situ X-ray Diffraction Study of the Oxidation of the Ti3Al Based Alloys

Improved High-Temperature Oxidation Properties for Mn-Containing Beta-Gamma TiAl with W Addition

Oxidation behavior of Ti-Nb-Mo-Al-Six refractory high entropy alloy at 1000°C

High-Temperature Oxidation Behavior of Refractory High-Entropy Alloys: Effect of Alloy Composition

Time-Resolved In-Situ Xrd Study on Oxidation Evolution of Ti2alnb-Based Alloys