Abstract:Oxidation resistance of titanium aluminide (TiAl) based alloys is a fundamental aspect for the high-temperature structural applications such as in the advanced hypersonic aircraft engines and gas turbines. The aim of this study was to identify oxidation kinetics and mechanisms through detailed microstructural characterization of a newly-developed Ti-44Al-4Nb-1.5Cr-0.5Mo-0.1B-0.1Y alloy via focused ion beam (FIB), transmission electron microscopy (TEM), X-ray diffraction (XRD), electron probe microanalysis (EPMA), scanning transmission electron microscopy (STEM), along with density functional theory (DFT) calculations. The alloy consisting mainly of γ-TiAl/α2-Ti3Al lamellar structure exhibited a superior oxidation resistance at 700 °C, and followed parabolic oxidation kinetics at 800 °C and 900 °C. The observed multi-layered scale structure consisted of TiO2, Al2O3-rich, Al2O3+TiO2, H-Ti2AlN+Al2O3+α2-Ti3Al, Z-Ti5Al3O2+AlNb2+Laves-(Ti,Nb)Cr2, and H-Ti2AlN/α2-Ti3Al lamellae from the outside to inside after high-temperature oxidation. The γ-TiAl/α2-Ti3Al lamellae near the scale/substrate interface were first transformed into H-Ti2AlN/α2-Ti3Al lamellae, with orientation relationships identified as ( 0001 ) α 2 / / ( 0001 ) T i 2 A l N , ( 10 1 ¯ 0 ) α 2 / / ( 10 1 ¯ 0 ) T i 2 A l N and [ 1 2 ¯ 10 ] α 2 / / [ 1 2 ¯ 10 ] T i 2 A l N . The H-Ti2AlN/α2-Ti3Al lamellae were then transformed into a metastable Z-Ti5Al3O2 phase at the scale/substrate interface. The Z-phase was decomposed to Ti3Al and Al2O3 as the scale/substrate interface moved inwardly. Ti3Al reacted further with oxygen and nitrogen to form Ti2AlN, which was finally oxidized to form TiO2 and α-Al2O3. A Nb-rich layer was present beneath the scale along with the formation of AlNb2 and Laves phase, and the doping effect of Nb to suppress the diffusion of oxygen occurred mainly in the TiO2+Al2O3 compound layer. The results obtained in this study would pave the way for the development of advanced oxidation-resistant TiAl-based materials for high-temperature applications.

Insights into High Temperature Oxidation of Al2O3-forming Ti3AlC2

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Characterization of the Surface Oxygen-Diffusion Zone of the Thermally Oxidized Titanium

Oxidation Mechanism of Three Fe-Al Alloys with and Without Addition of 0.1 At% Yttrium at 800 °C

OXIDATION MECHANISM OF BINARY Ti-Al ALLOYS AT ELEVATED TEMPERATURE

Understanding the growth mechanisms of TiO2/Al2O3 mixed scales formed on Al-depleted Ti2AlC at 1000–1200 °C

Non-isothermal Oxidation Characteristic of Titanium-Aluminium Intermetallic Alloys

Improvement of Intermediate-Temperature Oxidation Resistance of Ti3AlC2 by Pre-Oxidation at High Temperatures

Oxidation Behavior of TiC-containing Ti3AlC2based Material at 500–900 °C in Air

Microstructure evolution during oxidation of quinary Ti 3 (AlSiSn)C 2 at high temperatures and induced probable performance

Observation on the Interface of Α-Al2o3/cr2o3: Prepared by Oxidation of Al45Cr7

Microstructural evolution and high-temperature oxidation mechanisms of a titanium aluminide based alloy

Investigation of the Role of Silicon in TiAlSiN Coating Deposited on TiAl Alloys during Long-term Oxidation

Non-Isothermal Oxidation Behaviors and Mechanisms of Ti-Al Intermetallic Compounds.

Non-Isothermal Oxidation Behavior and Mechanism of a High Temperature Near-α Titanium Alloy

High temperature oxidation behavior of TiAl alloy with electrodeposited SiOC coating

Thermodynamic and microstructural study of Ti2AlNb oxides at 800 °C

Improving the high temperature oxidation resistance of TiAl alloy by SiOC coating

Microstructure and high-temperature oxidation behavior of Ti3AlC 2/W composites

Oxidation Resistance of TiAl-Inconel625 Graded Alloying Layer

Formation mechanism of Ti3AlC2 in TiO2–Al–C/TiC systems at high temperatures