Abstract:The application of microwave absorption materials, which can effectively convert electromagnetic energy into thermal energy and/or other forms of energy, can effectively solve the increasingly serious electromagnetic pollution. As a type of promising microwave absorption material, ternary transition metal carbides/nitrides MAX phases possess layered structure and superior conduction loss capability. However, poor impedance matching and single polarization loss type seriously hinder their improvement of microwave absorption performance. High-entropy engineering is expected to be an effective strategy to address the above problems simultaneously. Herein, a series of low-, medium-, and high-entropy MAX phases with Ti2AlC structure were successfully synthesized and their structure, composition, and morphology were comprehensively characterized. High-entropy MAX phase (Ti1/5Zr1/5V1/5Nb1/5Ta1/5)2AlC presents excellent microwave absorption performance with the optimal minimum reflection loss (RLmin) of −47 dB at 11.92 GHz (a thickness of 2.4 mm) and optimal effective absorption bandwidth of 3.92 GHz between 8.48 and 12.4 GHz (a thickness of 2.78 mm), which are better than those of our prepared low-/medium-entropy MAX phases as well as most of the other previously reported MAX phases. Such excellent microwave absorption performance of (Ti1/5Zr1/5V1/5Nb1/5Ta1/5)2AlC is attributed to high-entropy engineering, which not only optimizes the impedance matching through regulating permittivity but also introduces more polarization loss type and amount. This work reveals that high-entropy engineering is not only a workable method to enhance the microwave absorption performance in MAX phases, but also an effective strategy to tailor the balance between impedance matching and loss capability through compositional design in single-phase systems.

Synthesis and electromagnetic wave absorption performances of a novel (Mo0.25Cr0.25Ti0.25V0.25)3AlC2 high-entropy MAX phase

Entropy‐Driven Morphology Regulation of MAX Phase Solid Solutions with Enhanced Microwave Absorption and Thermal Insulation Performance

Synthesis and electromagnetic wave properties of Ti2.7M0.1T0.2AlC2 (M = Fe, Ni, T = Zr, Mo, W, Ta) powder

High-entropy enhanced microwave absorption in MAX phases

Multiprincipal Element M2FeC (M = Ti,V,Nb,Ta,Zr) MAX Phases with Synergistic Effect of Dielectric and Magnetic Loss

Multiprincipal Element M2 FeC (M = Ti,V,Nb,Ta,Zr) MAX Phases with Synergistic Effect of Dielectric and Magnetic Loss

Synthesis and characterization of a new out-of-plane ordered double-transition-metal MAX phase, Mo2VAlC2, and its two-dimensional derivate Mo2VC2Tx MXene

Effect of oxygen substitution and oxycarbide formation on oxidation of Ti3AlC2 MAX phase

New MAX Phase Compound Mo2TiAlC2: First-principles Study

First-principles Study for Discovery of Novel Synthesizable 2D High-entropy Transition Metal Carbides (MXenes)

Anomalous electromagnetic wave absorption of MAX phase ceramic powder achieved through high entropy solid solution and melt pool heat transfer preparation method

Microstructure and Oxidation Behaviors of (TiVCr)2AlC MAX-Phase Coatings Prepared by Magnetron Sputtering

Mechanical and Oxidation Behavior of Textured Ti2AlC and Ti3AlC2 MAX Phase Materials

Synthesis and characterizations of solid-solution i-MAX phase (W1/3Mo1/3R1/3)2AlC (R = Gd, Tb, Dy, Ho, Er and Y) and derivated i-MXene with improved electrochemical properties

Molten salt assisted synthesis and electromagnetic wave absorption properties of (V 1−x−y Ti x Cr y ) 2 AlC solid solutions

Structural Modifications and Electromagnetic Property Regulations of Ti 3 AlC 2 MAX for Enhancing Microwave Absorption through the Strategy of Fe Doping

High entropy six-component solid solution (Ti0.5Nb0.15Zr0.1Mo0.1Ta0.1W0.05)2AlC: A novel synthesis approach and its mechanical properties

Synthesis and Theoretical Study of Conductive Mo1.33CT2 MXene

Ultra‐rapid Synthesis of High‐entropy MAX Phases and Their Derivative MXenes for Battery Electrodes

A theoretical investigation of the effect of Ga alloying on thermodynamic stability, electronic-structure, and oxidation resistance of Ti2AlC MAX phase

Enhanced yield synthesis of bulk dense (M2/3Y1/3)2AlC (M = Cr, W, Mo) in-plane chemically ordered quaternary atomically laminated i-MAX phases and oxidation of (Cr2/3Y1/3)2AlC and (Mo2/3Y1/3)2AlC