Abstract:(Nb0.8Ti0.05Zr0.05Mo0.05Hf0.05)4AlC3 (MAXHf) and (Nb0.8Ti0.05Zr0.05Mo0.05Ta0.05)4AlC3 (MAXTa) ceramics were successfully prepared by SPS. The XRD results confirmed the formation of a single phase of M4AlC3 hexagonal crystal structure. The EDS results showed the homogenous distribution of the elements in the samples. The EPMA results further confirmed the homogenous distribution of the atomic percentage of elements in the samples. Mechanical properties were significantly increased as compared to Nb4AlC3. The fracture toughness, flexural strength, compressive strength and Vickers hardness (10 N) of MAXHf and MAXTa ceramics were achieved as 8.87 MPa m1/2, 448 MPa, 867 MPa, 6.5 GPa and 10.36 MPa m1/2, 557 MPa, 1039 MPa, 8.2 GPa, respectively. Recently multielements solid solution has shown significant improvement to the mechanical properties of parent MAX phases. Therefore, in this work, five elements with different radii were incorporated to check the effect on properties of MAX phases. (Nb0.8Ti0.05Zr0.05Mo0.05Hf0.05)4AlC3 (MAXHf) and (Nb0.8Ti0.05Zr0.05Mo0.05Ta0.05)4AlC3 (MAXTa) ceramics were successfully synthesized using the spark plasma sintering technique. The microstructure and elemental map analysis results further confirmed that the five transition metals were successfully solid soluted at the M‐sites of the hexagonal M4AlC3 unit cell. The mean elemental compositions for M‐site elements were achieved as Nb0.85Ti0.052Zr0.035Mo0.027Hf0.036 and Nb0.847Ti0.051Zr0.043Mo0.025Ta0.033 for MAXHf and MAXTa ceramics, respectively. The electrical and thermal conductivities of multielement solid solution MAX phases were decreased compared to pure Nb4AlC3. However, Mechanical properties were significantly increased with the solid solution of five transition metals. The fracture toughness, flexural strength, compressive strength and Vickers hardness (10 N) of MAXHf and MAXTa ceramics were achieved as 8.87 MPa m1/2, 448 MPa, 867 MPa, 6.5 GPa and 10.36 MPa m1/2, 557 MPa, 1039 MPa, 8.2 GPa, respectively. The enhanced mechanical properties suggest the effectiveness of the solid solution strengthening effect and provide new opportunities to further tailor the mechanical properties of the MAX phase ceramics.

High entropy six-component solid solution (Ti0.5Nb0.15Zr0.1Mo0.1Ta0.1W0.05)2AlC: A novel synthesis approach and its mechanical properties

Designing high entropy alloy-ceramic eutectic composites of MoNbRe0.5TaW(TiC)x with high compressive strength

Single-phase formation and mechanical properties of (TiZrNbTaMo)C high-entropy ceramics: First-principles prediction and experimental study

Understanding the electronic structure, mechanical properties, and thermodynamic stability of (TiZrHfNbTa)C combined experiments and first-principles simulation

Phase, microstructure and related mechanical properties of a series of (NbTaZr)C-Based high entropy ceramics

Structures and properties of the (NbMoTaW)100−xCx high-entropy composites

Mechanical properties and wear behavior of Tin+1(Al, A)Cn (A = Ga, In, Sn, n = 1, 2) via quasi-high-entropy of single atomic thick A layer

Enhanced properties of multi‐element soluted (Nb0.8Ti0.05Zr0.05Mo0.05M0.05)4AlC3 (M = Hf, Ta) ceramics

Microstructure and properties of Al0.5CoCrCuFeNiTix (x = 0-2.0) high-entropy alloys

W 2 AlC: A new layered MAX phase to adjust the balance between strength and ductility

A novel NbTaW0.5 (Mo2C)x refractory high-entropy alloy with excellent mechanical properties

Mechanical Properties and Oxidation Behavior of Ti-Doped Nb4alc3

Phase, microstructure and compressive properties of refractory high-entropy alloys CrHfNbTaTi and CrHfMoTaTi

Microstructure and mechanical properties of textured high‐entropy M4AlC3/Al2O3 (M = Ti, V, Mo, Nb, Ta) composites

Optimizing Al content to eliminate the brittle phase in lightweight TiZrNbTa0.1Alx refractory high-entropy alloys

Oxidation mechanism and mechanical properties of substitutional transition metal modified Nb4AlC3: A first-principles density functional theory study

Tuning composition and microstructure by doping Ti and C for enhancing mechanical property and wear resistance of Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy matrix composites

A practical guideline for designing high-entropy carbides based on (Ti1/3Mo1/3W1/3)C with high valence electron concentration

Design crystallographic ordering in NbTa 0.5 TiAl x refractory high entropy alloys with strength-plasticity synergy

Recently synthesized (Zr1-xTix)2AlC (0 - x - 1) solid solutions: Theoretical study of the effects of M mixing on physical properties

Lightweight, Refractory High-Entropy Alloy, CrNbTa0.25TiZr, with High Yield Strength