Abstract:High-entropy ceramics (HECs) become a focus as an innovative design of refractory materials due to their exclusive microstructure, huge adjustable components, some superior properties, and potential applications. Generally, they are manufactured by solid-state synthesis. However, in this paper, (Nb0.25Mo0.25Ta0.25W0.25)C (HEC-1) and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C (HEC-2) high-entropy carbide ceramics were successfully fabricated through vacuum arc melting using transition metal carbides powders. X-ray diffraction, energy dispersive spectrometer and scanning electron microscope were performed to analyze the phase evolution and microstructure uniformity. The experimental data exhibited that the as-prepared HEC-1 and HEC-2 formed into a single-phase body-centered cubic (BCC) structure. HEC-1 revealed a high compositional uniformity at microscale, while a segregation of molybdenum element was observed in HEC-2. Vickers hardness test results showed that HEC-1 presented a great microhardness of 23.13 GPa at 0.98 N, which was higher than the highest hardness of the individual binary carbides. The significantly enhanced hardness could be attributed to the solid solution strengthening effect. HEC-2 exhibited a good combination of high microhardness and fracture toughness due to the doping of Hf. These broaden the potential applications of HECs towards, such as protective coatings, high temperature structure parts, and machining tools. This study provides a new approach to prepare bulk HECs, and the tuning in toughness by exploring a novel intricated compositions would be of great significance for the further development.

Phase, microstructure and related mechanical properties of a series of (NbTaZr)C-Based high entropy ceramics

Microstructures and mechanical properties of high-entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C ceramics with the addition of SiC secondary phase

Host Lattice and Solid Solution Formation in an Octal-Cation (NbTaZrTiHfVWMo)C High Entropy Carbide Ceramic

First-principles study, fabrication and characterization of (Zr0.25Nb0.25Ti0.25V0.25)C high-entropy ceramic

Microstructures and mechanical properties of (Nb0.25Mo0.25Ta0.25W0.25)C and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C high-entropy carbide ceramics produced by arc melting

Toughening (NbTaZrW)C high‐entropy carbide ceramic through Mo doping

(Hf 0.2 Zr 0.2 Ta 0.2 Nb 0.2 Ti 0.2 )C high‐entropy ceramics with low thermal conductivity

Influence of multi-element bonding phase composition on the preparation and properties of pressureless-sintered (Ta, Nb, Ti, V, W)C high-entropy ceramics

Single-phase formation and mechanical properties of (TiZrNbTaMo)C high-entropy ceramics: First-principles prediction and experimental study

Hardness of single phase high entropy carbide ceramics with different compositions

High-entropy carbide-nitrides with enhanced toughness and sinterability

High entropy six-component solid solution (Ti0.5Nb0.15Zr0.1Mo0.1Ta0.1W0.05)2AlC: A novel synthesis approach and its mechanical properties

Irradiation damage in (Zr0.25Ta0.25Nb0.25Ti0.25)C high-entropy carbide ceramics

Effect of carbon content on the microstructure and mechanical properties of high-entropy (Ti0.2Zr0.2Nb0.2Ta0.2Mo0.2)Cx ceramics

Thermal and electrical properties of single‐phase high entropy carbide ceramics

From single high-entropy phase to multi-phase transition: Microstructural evolution of multi-component carbide (ZrHfVNbMoW)C realized by adjusting Hf content and temperature

Mechanical Properties of High-Entropy Carbides Prepared by High-Pressure Sintering: Role of Carbon Stoichiometry

First-principles prediction, fabrication and characterization of (Hf0.2Nb0.2Ta0.2Ti0.2Zr0.2)B2 high-entropy borides

Phase stability, mechanical and thermodynamic properties of (Hf, Zr, Ta, M)B 2 (M= Nb, Ti, Cr, W) quaternary high-entropy diboride ceramics via first-principles calculations

Processing and Properties of High-Entropy Ultra-High Temperature Carbides

Fine-grained dual-phase high-entropy ceramics derived from boro/carbothermal reduction