Abstract:High-entropy ceramics (HECs) become a focus as an innovative design of refractory materials due to their exclusive microstructure, huge adjustable components, some superior properties, and potential applications. Generally, they are manufactured by solid-state synthesis. However, in this paper, (Nb0.25Mo0.25Ta0.25W0.25)C (HEC-1) and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C (HEC-2) high-entropy carbide ceramics were successfully fabricated through vacuum arc melting using transition metal carbides powders. X-ray diffraction, energy dispersive spectrometer and scanning electron microscope were performed to analyze the phase evolution and microstructure uniformity. The experimental data exhibited that the as-prepared HEC-1 and HEC-2 formed into a single-phase body-centered cubic (BCC) structure. HEC-1 revealed a high compositional uniformity at microscale, while a segregation of molybdenum element was observed in HEC-2. Vickers hardness test results showed that HEC-1 presented a great microhardness of 23.13 GPa at 0.98 N, which was higher than the highest hardness of the individual binary carbides. The significantly enhanced hardness could be attributed to the solid solution strengthening effect. HEC-2 exhibited a good combination of high microhardness and fracture toughness due to the doping of Hf. These broaden the potential applications of HECs towards, such as protective coatings, high temperature structure parts, and machining tools. This study provides a new approach to prepare bulk HECs, and the tuning in toughness by exploring a novel intricated compositions would be of great significance for the further development.

(Hf 0.2 Zr 0.2 Ta 0.2 Nb 0.2 Ti 0.2 )C high‐entropy ceramics with low thermal conductivity

Phase, microstructure and related mechanical properties of a series of (NbTaZr)C-Based high entropy ceramics

Processing and Properties of High-Entropy Ultra-High Temperature Carbides

Pressureless sintering and properties of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics: The effect of pyrolytic carbon

First-principles study, fabrication and characterization of (Zr0.25Nb0.25Ti0.25V0.25)C high-entropy ceramic

Host Lattice and Solid Solution Formation in an Octal-Cation (NbTaZrTiHfVWMo)C High Entropy Carbide Ceramic

Thermal and electrical properties of single‐phase high entropy carbide ceramics

Microstructures and mechanical properties of (Nb0.25Mo0.25Ta0.25W0.25)C and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C high-entropy carbide ceramics produced by arc melting

From stoichiometric to non-stoichiometric high-entropy carbide: a case study of hafnium addition

Fabrication and Electromagnetic Wave Absorbing Properties of the (hf0.25zr0.25nb0.25ta0.25)c High-Entropy Ceramics

Microstructures and mechanical properties of high-entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C ceramics with the addition of SiC secondary phase

Hardness of single phase high entropy carbide ceramics with different compositions

Mechanical Properties of High-Entropy Carbides Prepared by High-Pressure Sintering: Role of Carbon Stoichiometry

Understanding the electronic structure, mechanical properties, and thermodynamic stability of (TiZrHfNbTa)C combined experiments and first-principles simulation

Low temperature densification mechanism and properties of Ta1-Hf C solid solutions with decarbonization and phase transition of Cr3C2

High-entropy carbide-nitrides with enhanced toughness and sinterability

A practical guideline for designing high-entropy carbides based on (Ti1/3Mo1/3W1/3)C with high valence electron concentration

Dual-Porosity (Ta0.2Nb0.2Ti0.2Zr0.2Hf0.2)C High-Entropy Ceramics with High Compressive Strength and Low Thermal Conductivity Prepared by Pressureless Sintering

Irradiation damage in (Zr0.25Ta0.25Nb0.25Ti0.25)C high-entropy carbide ceramics

Porous high-entropy (Zr0.25Hf0.25Nb0.25Ti0.25)C with high strength and uniform pore structure fabricated by freeze-casting

Synergistic hardening in a dual phase high‐entropy (Hf,Nb,Ta,Ti,Zr)C–(Hf,Nb,Ta,Ti,Zr)B2 ultra‐high temperature ceramic