Abstract:Research highlights•High-entropy transition metal carbides with regulatable carbon stoichiometry (HE TMCx) achieve the promoting of formation ability from carbon stoichiometry deviations.•Bulk (Zr0.25Hf0.25Ta0.25Nb0.25)Cx (SPS-ZHTNCx) with carbon stoichiometry deviations show promoted sintering.•Bulk (Zr0.25Hf0.25Ta0.25Nb0.25)Cx (SPS-ZHTNCx) present tunable mechanical properties.Tremendous efforts have been dedicated to promote the formation ability of high-entropy transition metal carbides. However, the majority of methods for the synthesis of high-entropy transition metal carbides still face the challenges of high temperature, low efficiency, additional longtime post-treatment and uncontrollable properties. To cope with these challenges, high-entropy transition metal carbides with regulatable carbon stoichiometry (HE TMCx) were designed and synthesized, achieving improved ability for single phase solid solutions formation, promoting of sintering and controllable mechanical properties. Two typical composition series, i.e., easily synthesized (Zr0.25Hf0.25Ta0.25Nb0.25)C (ZHTNC) and difficultly synthesized (Zr0.25Hf0.25Ta0.25Ti0.25)C (ZHTTC) are selected to demonstrate the promoting formation ability of single phase solid solutions from carbon stoichiometry deviations. Single phase high-entropy ZHTTC, which has been proven difficult in forming a single phase solid solution, can be prepared with the decrease of C/TM ratio under 2000°C; while the high-entropy ZHTNC, which has been proven easy in forming a single phase solid solution, can be synthesized at lower temperatures with the decrease of C/TM ratio. The synergistic effect of entropy stabilization and reduced chemical bond strength gaining from carbon stoichiometry deviations is responsible for the formation of single phase solid solutions and the promoted sintering of HE TMCx. For example, the relative density of bulk (Zr0.25Hf0.25Ta0.25Nb0.25)Cx (SPS-ZHTNCx) increases from 90.98% to 94.25% with decreasing the C/TM atomic ratio from 0.9 to 0.74. More importantly, the room temperature flexural strength, fracture toughness and brittleness index of SPS-ZHTNCx can be tuned in the range of 384 MPa–419 MPa, 4.41 MPa m1/2–4.73 MPa m1/2 and 3.679 μm−1/2–4.083 μm−1/2, respectively. Thus, the HE TMCx prepared by adjusting the ratio of carbon to refractory transition metal oxides have great potential for achieving low temperature synthesis, promoted sintering and tunable properties.

Mechanical Properties of High-Entropy Carbides Prepared by High-Pressure Sintering: Role of Carbon Stoichiometry

Role of carbon vacancies in determining the structural, mechanical, and thermodynamic properties of (HfTaZrNb)C1-x high entropy carbides: a first-principles study

Non-stoichiometry of (TiZrHfVNbTa)C x and its significance to the microstructure and mechanical properties

Processing and Properties of High-Entropy Ultra-High Temperature Carbides

Influence of vanadium content on the microstructural evolution and mechanical properties of (TiZrHfVNbTa)C high-entropy carbides processed by pressureless sintering

Local orders, lattice distortions, and electronic structure dominated mechanical properties of (ZrHfTaM1M2)C (M = Nb, Ti, V)

Effect of carbon content on the microstructure and mechanical properties of high-entropy (Ti0.2Zr0.2Nb0.2Ta0.2Mo0.2)Cx ceramics

Preparation and mechanical properties of (Ti0.2Zr0.2V0.2Nb0.2Ta0.2)(C0.6N0.4)-Co high-entropy cermets

Hardness of single phase high entropy carbide ceramics with different compositions

Fermi Level Engineering and Mechanical Properties of High Entropy Carbides

Pressureless sintering and properties of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics: The effect of pyrolytic carbon

Microstructures and mechanical properties of (Nb0.25Mo0.25Ta0.25W0.25)C and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C high-entropy carbide ceramics produced by arc melting

Nanocrystalline high‐entropy carbide ceramics with improved mechanical properties

Microstructures and mechanical properties of high-entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C ceramics with the addition of SiC secondary phase

The role of Cr addition on the processing and mechanical properties of high entropy carbides

Stability and mechanical properties of single-phase quinary high-entropy metal carbides: First-principles theory and thermodynamics

From stoichiometric to non-stoichiometric high-entropy carbide: a case study of hafnium addition

The significant influence of carbon content on mechanical and thermal properties of (VNbTaMoW)0.5Cx high entropy carbides

Regulating the formation ability and mechanical properties of high-entropy transition metal carbides by carbon stoichiometry

Host Lattice and Solid Solution Formation in an Octal-Cation (NbTaZrTiHfVWMo)C High Entropy Carbide Ceramic

First-principles study, fabrication and characterization of (Zr0.25Nb0.25Ti0.25V0.25)C high-entropy ceramic