Abstract:As a novel high-entropy ceramic material with a multi-cation and multi-anion sublattice structure, high-entropy carbonitride ceramics (HECNs) have exhibited outstanding comprehensive properties and attracted increasing attention. In this study, a new WC-based cemented carbide material reinforced by high-entropy carbonitride (Ti 0.2 W 0.2 Mo 0.2 V 0.2 Nb 0.2 )(C 0.7 N 0.3 ) (marked as HECN) was successfully fabricated by vacuum hot-pressed sintering. The mutual constraints between hardness and fracture toughness in extant WC-Co cemented carbide tool materials and their deficient high-temperature mechanical properties were effectively addressed. Moreover, for the low efficiency of the traditional carbothermal reduction nitridation, a novel method for rapidly preparing HECN powder was firstly proposed, namely the microwave-assisted carbothermal reduction nitridation, which could accelerate the heating rate and shorten the holding time. Single-phase HECN powder was successfully synthesized by this method, and the impacts of varying HECN content on the room and high-temperature mechanical properties of WC-based cemented carbide were investigated combined with the microstructure analysis by XRD\SEM. The results revealed that HECN effectively inhibited the grain growth of WC in cemented carbide, and the refined WC grains provided a high-volume fraction of grain boundaries, which prevented dislocation movement and increased the hardness. With the optimized HECN content of 10 wt%, the Vickers hardness and fracture toughness of WC-HECN-Co composite reached 21.58 ± 0.36 GPa and 12.27 ± 1.17 MPa∙m 1/2 respectively. Furthermore, WC-10HECN-10Co composites possessed outstanding high-temperature hardness and maintained a high hardness value of 13.16 ± 0.30 GPa at 800 °C, 37% higher than that of WC-10Co. The findings of this research hold significant practical implications for applying cemented carbide cutting tools in high-speed dry cutting.

Preparation and mechanical properties of (Ti0.2Zr0.2V0.2Nb0.2Ta0.2)(C0.6N0.4)-Co high-entropy cermets

Synthesis and Densification of (Zr-Hf-nb-ta)c-co High Entropy Cermet Prepared by Pressureless Melt Infiltration Using Spark Plasma Sintering

Tuning microstructure for superb mechanical properties in a Ti(C,N)-(WMoTaNbTi)C-Ni/Co cermets via change sintering temperature

Microstructures and mechanical properties of (Nb0.25Mo0.25Ta0.25W0.25)C and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C high-entropy carbide ceramics produced by arc melting

The Microstructure and Properties of Novel Ti(C,N)-based Cermets with Multi-Component CoCrFeNiCu High-Entropy Alloy Binders

Liquid phase assisted synthesis of (Ti,V,Nb,Ta,W)C-Ni high entropy carbide cermets by conventional pressureless sintering

Fabrication and Characterization of In-Situ Ti(C, N) - Cocrfeniti High Entropy Alloys Cermets

Fabrication of High-Entropy Carbide Ceramics (ti,zr,hf,nb,ta)c Through Low-Temperature Calcium-Hydride Reduction of Oxides

Fabrication and characterization of NbC-CoCrFeNiMn high-entropy alloy cermets

Nanocrystalline high‐entropy carbide ceramics with improved mechanical properties

Study on the rapid synthesis of high-entropy carbonitride powder and its remarkable hardening effects on cemented carbide tool materials

Pressureless sintering and properties of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics: The effect of pyrolytic carbon

Mechanical Properties of High-Entropy Carbides Prepared by High-Pressure Sintering: Role of Carbon Stoichiometry

High-entropy carbide-nitrides with enhanced toughness and sinterability

Enhanced Mechanical Properties and High Temperature Oxidation Resistance of Ti(C,N)-based Cermets Containing Zr

Low temperature synthesis and densification of (Ti,V,Nb,Ta,Mo)(C,N) high-entropy carbonitride ceramics

Fabrication and Properties of Ti(C,N)-Based Cermets with Multi-Component Alcocrfeni High-Entropy Alloys Binder

Microstructure and Characterization of (ti,v,nb,ta)(c,n) High-Entropy Ceramic

Microstructure, preparation and properties of TiC-Fe/ FeCoCrNiMn cermet with a core-rim structure

First-principles Study, Fabrication, and Characterization of (hf0.2zr0.2ta0.2nb0.2ti0.2)c High-Entropy Ceramic

Fabrication of Multi-Anionic High-Entropy Carbonitride Ultra-High-temperature Ceramics by a Green and Low-Cost Process with Excellent Mechanical Properties