Abstract:As a novel high-entropy ceramic material with a multi-cation and multi-anion sublattice structure, high-entropy carbonitride ceramics (HECNs) have exhibited outstanding comprehensive properties and attracted increasing attention. In this study, a new WC-based cemented carbide material reinforced by high-entropy carbonitride (Ti 0.2 W 0.2 Mo 0.2 V 0.2 Nb 0.2 )(C 0.7 N 0.3 ) (marked as HECN) was successfully fabricated by vacuum hot-pressed sintering. The mutual constraints between hardness and fracture toughness in extant WC-Co cemented carbide tool materials and their deficient high-temperature mechanical properties were effectively addressed. Moreover, for the low efficiency of the traditional carbothermal reduction nitridation, a novel method for rapidly preparing HECN powder was firstly proposed, namely the microwave-assisted carbothermal reduction nitridation, which could accelerate the heating rate and shorten the holding time. Single-phase HECN powder was successfully synthesized by this method, and the impacts of varying HECN content on the room and high-temperature mechanical properties of WC-based cemented carbide were investigated combined with the microstructure analysis by XRD\SEM. The results revealed that HECN effectively inhibited the grain growth of WC in cemented carbide, and the refined WC grains provided a high-volume fraction of grain boundaries, which prevented dislocation movement and increased the hardness. With the optimized HECN content of 10 wt%, the Vickers hardness and fracture toughness of WC-HECN-Co composite reached 21.58 ± 0.36 GPa and 12.27 ± 1.17 MPa∙m 1/2 respectively. Furthermore, WC-10HECN-10Co composites possessed outstanding high-temperature hardness and maintained a high hardness value of 13.16 ± 0.30 GPa at 800 °C, 37% higher than that of WC-10Co. The findings of this research hold significant practical implications for applying cemented carbide cutting tools in high-speed dry cutting.

Microstructures and mechanical properties of (Nb0.25Mo0.25Ta0.25W0.25)C and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C high-entropy carbide ceramics produced by arc melting

Mechanical properties and high-pressure behavior of high entropy carbide (Mo, Nb, Ta, V, W)C

A practical guideline for designing high-entropy carbides based on (Ti1/3Mo1/3W1/3)C with high valence electron concentration

Microstructure, Mechanical and Tribological Properties of High-Entropy Carbide (MoNbTaTiV)C5

Study on the rapid synthesis of high-entropy carbonitride powder and its remarkable hardening effects on cemented carbide tool materials

Structures and properties of the (NbMoTaW)100−xCx high-entropy composites

High-entropy carbide-nitrides with enhanced toughness and sinterability

Microstructures and mechanical properties of high-entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C ceramics with the addition of SiC secondary phase

Synthesis and Mechanical and Elevated Temperature Tribological Properties of a Novel High-Entropy (tivnbmow)c 4.375 with Carbon Stoichiometry Deviation

Preparation and mechanical properties of (Ti0.2Zr0.2V0.2Nb0.2Ta0.2)(C0.6N0.4)-Co high-entropy cermets

High Entropy Carbide Ceramics from Different Starting Materials

Synergistic effects of high-entropy alloy addition on hardness and fracture toughness of (Ti,Nb,Ta,Mo,W)(C,N)-based high-entropy ceramics

From stoichiometric to non-stoichiometric high-entropy carbide: a case study of hafnium addition

Processing and Properties of High-Entropy Ultra-High Temperature Carbides

Host Lattice and Solid Solution Formation in an Octal-Cation (NbTaZrTiHfVWMo)C High Entropy Carbide Ceramic

High-entropy Metal Carbide Nanowires

Mechanical and tribological performance of (TiNbTaWMo)C high-entropy ceramics in a wide temperature range

Fabrication of High-Entropy Carbide Ceramics (ti,zr,hf,nb,ta)c Through Low-Temperature Calcium-Hydride Reduction of Oxides

Structure evolutions of the polymer derived medium-/high-entropy metal carbides

Synthesis and characterization of high-entropy carbide dispersed strengthening tungsten: Mechanical and thermal properties analysis

Reactive Sintering of Dual-Phase High-Entropy Ceramics with Superior Mechanical Properties