Abstract:NbMoTaW refractory high entropy alloy (RHEA) possesses superior high temperature mechanical strength while the very low plastic strain at room temperature limits its practical applications. In present work, the method of adjusting composition was employed to improve the mechanical properties of (NbTaW)1-xMox (x=0, 0.05, 0.15, 0.25) alloys especially the plasticity at room temperature by the combination of experiments and first-principles calculations. Phase composition of the (NbTaW)1-xMox alloys identified using experiments and theoretical prediction were all single-phase solid solution. Microstructure and elements distribution of the alloys were characterized by SEM and EDS. All the as-casted alloys had dendrite structures and the grain size firstly increased (x<15) and then decreased (x>15) with the increase of Mo content. The compressive properties and the analysis of fracture surface demonstrated that strength and ductility of (NbTaW)1-xMox alloys were obviously enhanced with the decrease of Mo content. NbTaW MEA had the maximum mechanical strength (1460 MPa) and ductility (16.2%) in the designed alloys. Both the mechanical strength and plasticity at room temperature were greatly improved compared with that of NbMoTaW RHEA. The experimental results well agreed with that of first-principles calculations. The elastic anisotropy and microhardness of these alloys were also predicted. The orders of elastic anisotropy were (NbTaW)0.75Mo0.25 < (NbTaW)0.85Mo0.15 < (NbTaW)0.95Mo0.05 < NbTaW. The hardness of (NbTaW)1-xMox alloys were increased with increasing of Mo content. Optimizing composition was demonstrated to be an effective method to improve the mechanical properties of NbMoTaW refractory high entropy alloy.

Structures and properties of the (NbMoTaW)100−xCx high-entropy composites

Microstructures and mechanical properties of (Nb0.25Mo0.25Ta0.25W0.25)C and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C high-entropy carbide ceramics produced by arc melting

Interstitially carbon-alloyed refractory high-entropy alloys with a body-centered cubic structure

Designing high entropy alloy-ceramic eutectic composites of MoNbRe0.5TaW(TiC)x with high compressive strength

Mechanical properties and high-pressure behavior of high entropy carbide (Mo, Nb, Ta, V, W)C

Synergistic effects of high-entropy alloy addition on hardness and fracture toughness of (Ti,Nb,Ta,Mo,W)(C,N)-based high-entropy ceramics

Microstructure and mechanical properties of MoNbW(TaC)x composites

A two-phase ultrafine-grained NbMoTaWV refractory high entropy alloy with prominent compressive properties

Effect of Ti Additions on Mechanical Properties of NbMoTaW and VNbMoTaW Refractory High Entropy Alloys

A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: Microstructural evolution and mechanical properties

Improving Mechanical Properties of Co-Cr-Fe-Ni High Entropy Alloy via C and Mo Microalloying

A Study of the Structure and Mechanical Properties of Nb-Mo-Co-X (X = Hf, Zr, Ti) Refractory High-Entropy Alloys

Effect of Mo Content on Microstructure and Mechanical Properties of CoCrFeNi Series High-entropy Alloys

Mechanical performance of (NbTaW)1−xMox (x = 0, 0.05, 0.15, 0.25) refractory high entropy alloys: Perspective from experiments and first principles calculations

A novel NbTaW0.5 (Mo2C)x refractory high-entropy alloy with excellent mechanical properties

Microstructure evolution and mechanical properties of NbHfTiVCx novel refractory high entropy alloys with variable carbon content

Phase, microstructure and compressive properties of refractory high-entropy alloys CrHfNbTaTi and CrHfMoTaTi

Microstructures and Mechanical Properties of TixNbMoTaW Refractory High Entropy Alloys

Weak enthalpy-interaction-element-modulated NbMoTaW high-entropy alloy thin films

Effect of alloying elements on the structure and mechanical properties of NbMoTaWX (X = Cr, V, Ti, Zr, and Hf) refractory high-entropy alloys