Abstract:NbMoTaW refractory high entropy alloy (RHEA) possesses superior high temperature mechanical strength while the very low plastic strain at room temperature limits its practical applications. In present work, the method of adjusting composition was employed to improve the mechanical properties of (NbTaW)1-xMox (x=0, 0.05, 0.15, 0.25) alloys especially the plasticity at room temperature by the combination of experiments and first-principles calculations. Phase composition of the (NbTaW)1-xMox alloys identified using experiments and theoretical prediction were all single-phase solid solution. Microstructure and elements distribution of the alloys were characterized by SEM and EDS. All the as-casted alloys had dendrite structures and the grain size firstly increased (x<15) and then decreased (x>15) with the increase of Mo content. The compressive properties and the analysis of fracture surface demonstrated that strength and ductility of (NbTaW)1-xMox alloys were obviously enhanced with the decrease of Mo content. NbTaW MEA had the maximum mechanical strength (1460 MPa) and ductility (16.2%) in the designed alloys. Both the mechanical strength and plasticity at room temperature were greatly improved compared with that of NbMoTaW RHEA. The experimental results well agreed with that of first-principles calculations. The elastic anisotropy and microhardness of these alloys were also predicted. The orders of elastic anisotropy were (NbTaW)0.75Mo0.25 < (NbTaW)0.85Mo0.15 < (NbTaW)0.95Mo0.05 < NbTaW. The hardness of (NbTaW)1-xMox alloys were increased with increasing of Mo content. Optimizing composition was demonstrated to be an effective method to improve the mechanical properties of NbMoTaW refractory high entropy alloy.

A two-phase ultrafine-grained NbMoTaWV refractory high entropy alloy with prominent compressive properties

A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: Microstructural evolution and mechanical properties

A high-density non-equiatomic WTaMoNbV high-entropy alloy: Alloying behavior, microstructure and mechanical properties

Dual Phase Equal-Atomic NbTaTiZr High-Entropy Alloy with Ultra-Fine Grain and Excellent Mechanical Properties Fabricated by Spark Plasma Sintering

Bulk nanocrystalline boron-doped VNbMoTaW high entropy alloys with ultrahigh strength, hardness, and resistivity

Refractory CrMoNbWV High-Entropy Alloy Manufactured by Mechanical Alloying and Spark Plasma Sintering: Evolution of Microstructure and Properties

Effect of Ti Additions on Mechanical Properties of NbMoTaW and VNbMoTaW Refractory High Entropy Alloys

Effect of Mechanical Alloying and Sintering Behavior on the Microstructure and Properties of NbMoTaWRe Refractory High Entropy Alloy

Multicomponent Ni-rich High-Entropy Alloy Toughened with Irregular-Shaped Precipitates and Serrated Grain Boundaries

Microstructure and mechanical properties of the TiZrNbMoTa refractory high-entropy alloy produced by mechanical alloying and spark plasma sintering

Microstructure and Properties of NiCoCrAlTi High Entropy Alloy Prepared Using MA-SPS Technique

Microstructures and mechanical properties of novel MoTaVW refractory high-entropy alloys

A novel NbTaW0.5 (Mo2C)x refractory high-entropy alloy with excellent mechanical properties

Ultrastrong, high plasticity, and softening-resistant refractory high-entropy alloy via stable isostructural coherent interfaces

Mechanical performance of (NbTaW)1−xMox (x = 0, 0.05, 0.15, 0.25) refractory high entropy alloys: Perspective from experiments and first principles calculations

A New Type of High Entropy Alloy Composite Fe18Ni23Co25Cr21Mo8WNb3C2 Prepared by Mechanical Alloying and Hot Pressing Sintering

Structures and properties of the (NbMoTaW)100−xCx high-entropy composites

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Stable Nanocrystalline NbMoTaW High Entropy Alloy Thin Films with Excellent Mechanical and Electrical Properties

A Study of the Structure and Mechanical Properties of Nb-Mo-Co-X (X = Hf, Zr, Ti) Refractory High-Entropy Alloys