Abstract:High-entropy carbides are a nascent group of ceramics that are promising for high-temperature applications due to the combination of good stability, high hardness (H), high strength, and superior creep resistance that they display. Due to high melting points and low lattice diffusion coefficients, however, the high-entropy carbides are usually difficult to consolidate to a nearly full density. To cope with this challenge, herein, binary carbides including TiC, V8C7, NbC, Mo2C, and WC with different carbon stoichiometry were used to prepare dense high-entropy (TiVNbMoW)C-4.375, and the influence of carbon vacancy on formation ability and mechanical properties of carbon-deficient high-entropy (TiVNbMoW)C-4.375 were investigated. Intriguingly, although the starting binary carbides have different crystal structures and carbon stoichiometry, the as-prepared high-entropy material showed a rock-salt structure with a relatively high density (98.1%) and good mechanical properties with hardness of 19.4 +/- 0.4 GPa and fracture toughness (K-IC) of 4.02 MPa center dot m(1/2). More importantly, the high-entropy (TiVNbMoW)C4.375 exhibited low coefficient of friction (COF) at room temperature (RT) and 800 degrees C. Wear rate (W) gradually increased with the temperature rising, which were attributed to the formation of low-hardness oxidation films at high temperatures to aggravate wear. At 800 degrees C, lubricating films formed from sufficient oxidation products of V2O5 and MoO3 effectively improved tribological behavior of the high-entropy (TiVNbMoW)C-4.375. Wear mechanisms were mainly abrasive wear resulting from grain pullout and brittle fracture as well as oxidation wear generated from high-temperature reactions. These results are useful as valuable guidance and reference to the synthesis of high-entropy ceramics (HECs) for sliding parts under high-temperature serving conditions.

Influence of vanadium content on the microstructural evolution and mechanical properties of (TiZrHfVNbTa)C high-entropy carbides processed by pressureless sintering

Mechanisms and mechanical properties of high-temperature high-pressure sintered vanadium carbide ceramics

Grain Growth Kinetics and Densification Mechanism of (tizrhfvnbta)c High-Entropy Ceramic under Pressureless Sintering

Mechanical Properties of High-Entropy Carbides Prepared by High-Pressure Sintering: Role of Carbon Stoichiometry

A practical guideline for designing high-entropy carbides based on (Ti1/3Mo1/3W1/3)C with high valence electron concentration

Non-stoichiometry of (TiZrHfVNbTa)C x and its significance to the microstructure and mechanical properties

Influence of multi-element bonding phase composition on the preparation and properties of pressureless-sintered (Ta, Nb, Ti, V, W)C high-entropy ceramics

Pressureless sintering and properties of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics: The effect of pyrolytic carbon

Synthesis and Mechanical and Elevated Temperature Tribological Properties of a Novel High-Entropy (tivnbmow)c 4.375 with Carbon Stoichiometry Deviation

Densification, Microstructure and Mechanical Properties of Multicomponent (tizrhfnbtamo)c Ceramic Prepared by Pressureless Sintering

Effect of carbon content on the microstructure and mechanical properties of high-entropy (Ti0.2Zr0.2Nb0.2Ta0.2Mo0.2)Cx ceramics

Nanocrystalline high‐entropy carbide ceramics with improved mechanical properties

Preparation and mechanical properties of (Ti0.2Zr0.2V0.2Nb0.2Ta0.2)(C0.6N0.4)-Co high-entropy cermets

Rapid densification and mechanical properties of ultra-high-pressure sintered transition metal carbide ceramics

Low temperature synthesis and densification of (Ti,V,Nb,Ta,Mo)(C,N) high-entropy carbonitride ceramics

Non-stoichiometry of (tizrhfvnbta)cx and Its Significance to the Microstructure and Mechanical Properties

Mechanical and tribological performance of (TiNbTaWMo)C high-entropy ceramics in a wide temperature range

Effects of vanadium content on the microstructure and tensile properties of NbTiV x Zr high-entropy alloys

The effect of pressure tuning on the structure and mechanical properties of high-entropy carbides

Influence of TiC content on microstructure and mechanical properties of (Ta, Ti)C ceramics

Cr-assisted Low-Temperature Densification of (ti,zr,nb,ta,mo)c High-Entropy Carbides with Ultrafine Grain and Enhanced Hardness