Abstract:CoCrFeNi is a well-studied face centered cubic (fcc) high entropy alloy (HEA) that exhibits excellent ductility but only limited strength. The present study focusses on improving the strength-ductility balance of this HEA by addition of varying amounts of SiC using an arc melting route. Chromium present in the base HEA is found to result in decomposition of SiC during melting. Consequently, interaction of free carbon with chromium results in the in-situ formation of chromium carbide, while free silicon remains in solution in the base HEA and/or interacts with the constituent elements of the base HEA to form silicides. The changes in microstructural phases with increasing amount of SiC are found to follow the sequence: fcc → fcc + eutectic → fcc + chromium carbide platelets → fcc + chromium carbide platelets + silicides → fcc + chromium carbide platelets + silicides + graphite globules/flakes. In comparison to both conventional and high entropy alloys, the resulting composites were found to exhibit a very wide range of mechanical properties (yield strength from 277 MPa with more than 60% elongation to 2522 MPa with 6% elongation). Some of the developed high entropy composites showed an outstanding combination of mechanical properties (yield strength 1200 MPa with 37% elongation) and occupied previously unattainable regions in a yield strength versus elongation map. In addition to their significant elongation, the hardness and yield strength of the HEA composites are found to lie in the same range as those of bulk metallic glasses. It is therefore believed that development of high entropy composites can help in obtaining outstanding combinations of mechanical properties for advanced structural applications.

Novel refractory high-entropy metal-ceramic composites with superior mechanical properties

High-entropy carbide-nitrides with enhanced toughness and sinterability

Reactive Sintering of Dual-Phase High-Entropy Ceramics with Superior Mechanical Properties

Enhanced Toughness of High-Entropy Carbide Ceramic (tizrhfnbta)0.2c Through Composite B4c

Superhard bulk high-entropy carbides with enhanced toughness via metastable in-situ particles

Synergistic effects of high-entropy alloy addition on hardness and fracture toughness of (Ti,Nb,Ta,Mo,W)(C,N)-based high-entropy ceramics

Ceramic-reinforced HEA matrix composites exhibiting an excellent combination of mechanical properties

The Microstructure and Properties of Novel Ti(C,N)-based Cermets with Multi-Component CoCrFeNiCu High-Entropy Alloy Binders

Microstructures and mechanical properties of (Nb0.25Mo0.25Ta0.25W0.25)C and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C high-entropy carbide ceramics produced by arc melting

Preparation and mechanical properties of (Ti0.2Zr0.2V0.2Nb0.2Ta0.2)(C0.6N0.4)-Co high-entropy cermets

Tuning microstructure for superb mechanical properties in a Ti(C,N)-(WMoTaNbTi)C-Ni/Co cermets via change sintering temperature

Structures and properties of the (NbMoTaW)100−xCx high-entropy composites

A novel strategy for rapid fabrication of continuous carbon fiber reinforced (TiZrHfNbTa)C high-entropy ceramic composites: High-entropy alloy in-situ reactive melt infiltration

Ultra-High Strength TiC/Refractory High-Entropy-Alloy Composite Prepared by Powder Metallurgy

Microstructure, preparation and properties of TiC-Fe/ FeCoCrNiMn cermet with a core-rim structure

Novel Strength-Electrical Conductivity Synergy in Cu-based Composites Reinforced with TiZrNbTa High Entropy Alloy

High-performance Multifunctional (hf 0.2nb 0.2ta 0.2ti 0.2zr 0.2)C High-Entropy Ceramic Reinforced with Low-Loading 3D Hybrid Graphene–carbon Nanotube

Synthesis and characterization of high-entropy carbide dispersed strengthening tungsten: Mechanical and thermal properties analysis

Microstructures and Formation Mechanism of Continuous Carbon Fiber-Reinforced (tizrhfnbta)c High-Entropy Ceramic Composites Fabricated Via High-Entropy Alloy Reactive Melt Infiltration

Microstructures and Tribological Properties of TiC Reinforced FeCoNiCuAl High-Entropy Alloy at Normal and Elevated Temperature

Fabrication and Characterization of In-Situ Ti(C, N) - Cocrfeniti High Entropy Alloys Cermets