Abstract:High temperature thermal conductivity up to 1200 °C and the electrical conductivity up to 800 °C were studied for (Zr-Ta-W-Ti)C-SiC (ZTaWT-S) based high entropy carbide ceramics containing carbonaceous reinforcements (multi-walled carbon nanotubes (CNT), graphite flakes (G), and graphene nanoplatelets (GNP). The thermal diffusivity (0.055–0.067 cm −2 s) and specific heat capacity (0.38–0.44 Jg −1 K −1 ) were experimentally measured from 50 °C to 1200 °C for all the composites. The thermal conductivity of the composites lies in the range of 18.2 Wm −1 K −1 to 22.9 Wm −1 K −1 for the temperature range of 50 °C-1200 °C, from the significant phonon scattering at the interfaces of the elements of different size and atomic masses. At 50 °C, the limited thermal conductivity enhancement for carbonaceous reinforcements from 18.2 Wm −1 K −1 for ZTaWT-S to 21.0 Wm −1 K −1 for ZTaWT-SC (CNT reinforcement) to 20.8 Wm −1 K −1 for ZTaWT-SG (graphite reinforcement), and to 19.9 Wm −1 K −1 ZTaWT-SGNP (graphene reinforcement) is attributed to the high thermal resistance at the interfaces between different phases and interface with carbon additives, evident in the TEM investigation of the crushed sintered sample, and at the grain boundaries (interfacial thermal resistance). The phonon and electron contribution to thermal conductivity were also assessed and the κe/κexp ratio analysis confirms the predominant role of phonon contribution to thermal conductivity (∼65%) at low temperature (∼50 °C) and of electronic contribution at high temperatures (∼800 °C) as the dominant mechanism of thermal transport in the investigated composites and ZTaWT-SGNP composite with the highest κe/κexp ratio of 0.84 (extrapolated) emerges as the most electronically conductive material.

Thermal and electrical properties of single‐phase high entropy carbide ceramics

Hardness of single phase high entropy carbide ceramics with different compositions

Mechanical and tribological performance of (TiNbTaWMo)C high-entropy ceramics in a wide temperature range

Pressureless sintering and properties of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics: The effect of pyrolytic carbon

Microstructures and mechanical properties of (Nb0.25Mo0.25Ta0.25W0.25)C and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C high-entropy carbide ceramics produced by arc melting

Elevated temperature thermal and electrical properties of carbon nanotubes, graphite and graphene reinforced (Zr-Ta-W-Ti)C-SiC based high entropy carbide ceramics

Phase, microstructure and related mechanical properties of a series of (NbTaZr)C-Based high entropy ceramics

Processing and Properties of High-Entropy Ultra-High Temperature Carbides

(Hf 0.2 Zr 0.2 Ta 0.2 Nb 0.2 Ti 0.2 )C high‐entropy ceramics with low thermal conductivity

Low-temperature synthesis and mechanical performance analysis of single-phase high-entropy (Ti,Cr,V,Nb,Ta)B 1.9 ceramics

Phase stability, mechanical and thermodynamic properties of (Hf, Zr, Ta, M)B 2 (M= Nb, Ti, Cr, W) quaternary high-entropy diboride ceramics via first-principles calculations

Single-phase formation and mechanical properties of (TiZrNbTaMo)C high-entropy ceramics: First-principles prediction and experimental study

Mechanical Properties of High-Entropy Carbides Prepared by High-Pressure Sintering: Role of Carbon Stoichiometry

Strength of single‐phase high‐entropy carbide ceramics up to 2300°C

A practical guideline for designing high-entropy carbides based on (Ti1/3Mo1/3W1/3)C with high valence electron concentration

Microstructures and mechanical properties of high-entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C ceramics with the addition of SiC secondary phase

Elasticity, mechanical and thermal properties of polycrystalline hafnium carbide and tantalum carbide at high pressure

Thermal conductivity reduction in (Zr$_{0.25}$Ta$_{0.25}$Nb$_{0.25}$Ti$_{0.25}$)C high entropy carbide from extrinsic lattice defects

Thermal conductivity reduction in (Zr0.25Ta0.25Nb0.25Ti0.25)C high entropy carbide from extrinsic lattice defects

Microstructure, Mechanical and Tribological Properties of High-Entropy Carbide (MoNbTaTiV)C5

High entropy six-component solid solution (Ti0.5Nb0.15Zr0.1Mo0.1Ta0.1W0.05)2AlC: A novel synthesis approach and its mechanical properties