Abstract:Research highlights•High-entropy transition metal carbides with regulatable carbon stoichiometry (HE TMCx) achieve the promoting of formation ability from carbon stoichiometry deviations.•Bulk (Zr0.25Hf0.25Ta0.25Nb0.25)Cx (SPS-ZHTNCx) with carbon stoichiometry deviations show promoted sintering.•Bulk (Zr0.25Hf0.25Ta0.25Nb0.25)Cx (SPS-ZHTNCx) present tunable mechanical properties.Tremendous efforts have been dedicated to promote the formation ability of high-entropy transition metal carbides. However, the majority of methods for the synthesis of high-entropy transition metal carbides still face the challenges of high temperature, low efficiency, additional longtime post-treatment and uncontrollable properties. To cope with these challenges, high-entropy transition metal carbides with regulatable carbon stoichiometry (HE TMCx) were designed and synthesized, achieving improved ability for single phase solid solutions formation, promoting of sintering and controllable mechanical properties. Two typical composition series, i.e., easily synthesized (Zr0.25Hf0.25Ta0.25Nb0.25)C (ZHTNC) and difficultly synthesized (Zr0.25Hf0.25Ta0.25Ti0.25)C (ZHTTC) are selected to demonstrate the promoting formation ability of single phase solid solutions from carbon stoichiometry deviations. Single phase high-entropy ZHTTC, which has been proven difficult in forming a single phase solid solution, can be prepared with the decrease of C/TM ratio under 2000°C; while the high-entropy ZHTNC, which has been proven easy in forming a single phase solid solution, can be synthesized at lower temperatures with the decrease of C/TM ratio. The synergistic effect of entropy stabilization and reduced chemical bond strength gaining from carbon stoichiometry deviations is responsible for the formation of single phase solid solutions and the promoted sintering of HE TMCx. For example, the relative density of bulk (Zr0.25Hf0.25Ta0.25Nb0.25)Cx (SPS-ZHTNCx) increases from 90.98% to 94.25% with decreasing the C/TM atomic ratio from 0.9 to 0.74. More importantly, the room temperature flexural strength, fracture toughness and brittleness index of SPS-ZHTNCx can be tuned in the range of 384 MPa–419 MPa, 4.41 MPa m1/2–4.73 MPa m1/2 and 3.679 μm−1/2–4.083 μm−1/2, respectively. Thus, the HE TMCx prepared by adjusting the ratio of carbon to refractory transition metal oxides have great potential for achieving low temperature synthesis, promoted sintering and tunable properties.

Understanding the electronic structure, mechanical properties, and thermodynamic stability of (TiZrHfNbTa)C combined experiments and first-principles simulation

Frist-principles prediction of elastic, electronic, and thermodynamic properties of high entropy carbide ceramic (TiZrNbTa)C

A practical guideline for designing high-entropy carbides based on (Ti1/3Mo1/3W1/3)C with high valence electron concentration

Local orders, lattice distortions, and electronic structure dominated mechanical properties of (ZrHfTaM1M2)C (M = Nb, Ti, V)

Host Lattice and Solid Solution Formation in an Octal-Cation (NbTaZrTiHfVWMo)C High Entropy Carbide Ceramic

Single-phase formation and mechanical properties of (TiZrNbTaMo)C high-entropy ceramics: First-principles prediction and experimental study

First-principles study, fabrication and characterization of (Zr0.25Nb0.25Ti0.25V0.25)C high-entropy ceramic

Stability and mechanical properties of single-phase quinary high-entropy metal carbides: First-principles theory and thermodynamics

Processing and Properties of High-Entropy Ultra-High Temperature Carbides

A first-principles study of the stability and mechanical properties of ternary transition metal carbide alloys

High entropy six-component solid solution (Ti0.5Nb0.15Zr0.1Mo0.1Ta0.1W0.05)2AlC: A novel synthesis approach and its mechanical properties

Mechanical Properties of High-Entropy Carbides Prepared by High-Pressure Sintering: Role of Carbon Stoichiometry

Optimized Design of Quinary High-Entropy Transition Metal Carbide Ceramics Based on First Principles

Synthesis of high-entropy carbides (TiTaNb)xHfyZrzC with strong thermal-oxidative resistant properties by mechanical alloying and spark plasma sintering

Regulating the formation ability and mechanical properties of high-entropy transition metal carbides by carbon stoichiometry

Non-stoichiometry of (TiZrHfVNbTa)C x and its significance to the microstructure and mechanical properties

Machine-learning Driven Synthesis of TiZrNbHfTaC5 High-Entropy Carbide

A First-principles investigation of light weight high mechanical performance high-entropy carbides: the research of bottom-up compositional designing

Synthesis and characterization of high-entropy carbide dispersed strengthening tungsten: Mechanical and thermal properties analysis

Preparation and mechanical properties of (Ti0.2Zr0.2V0.2Nb0.2Ta0.2)(C0.6N0.4)-Co high-entropy cermets

First principles calculation on electronic structures and mechanical properties of TiCrTaV high–entropy alloy