Abstract:TiC + Al binder metal-matrix composites are fabricated by self-propagating high-temperature synthesis (SHS) in reaction power mixtures of titanium, carbon (ash), and aluminum. It is established that stable combustion in a steady wave mode is possible with a content up to 50 wt % aluminum powder in a reaction mixture. Crushing of synthesized loose cakes and subsequent sieve scattering gave composite powders with a cloddy shape close to equilibrium. This shape is favorable for good looseness, which is necessary when using powders for surfacing and sputtering of wear-resistant coatings. Synthesis products are investigated by scanning electron microscopy and X-ray structural (XRS) and energy-dispersive X-ray (EDX) analysis. It is established that the average size of carbide inclusions in the composite structure decreases monotonically with an increase in the content of the aluminum powder inert in the thermal aspect in reaction mixtures. The lattice parameter of titanium carbide determined by the XRS method turned out much smaller than known values for equiatomic-composition carbide. Herewith, no dependence of the lattice parameter on the aluminum content is found for composites. Carbide inclusions in the composite structure are investigated by the EDX method, and it is established that the titanium content corresponds to its concentration in equiatomic-composition carbide. In addition to titanium and carbon, carbide contains up to 2.5 wt % dissolved aluminum, which can affect the carbide lattice parameter.

Formation of M N +1 AX N Phases in Ti–Cr–Al–C Systems by Self-Propagating High-Temperature Synthesis

Formation of Mn＋lAXn Phases in Ti-Cr-AI-C Systems by Self-Propagating High-Temperature Synthesis

Rapid Synthesis of Bulk Ti2alc by Self-Propagating High Temperature Combustion Synthesis with A Pseudo-Hot Isostatic Pressing Process

Growth Morphology and Microstructural Characterization of Nonstoichiometric Ti2alc Bulk Synthesized by Self-Propagating High Temperature Combustion Synthesis with Pseudo Hot Isostatic Pressing

Influence Of Heat Treatment On The Microstructure And Properties Of Ti2alc By Shs/Phip

Effects of Forming Conditions and TiC–TiB 2 Contents on the Microstructures of Self-Propagating High-Temperature Synthesized NiAl–TiC–TiB 2 Composites

Self-Propagating High-Temperature Synthesis of Ti3SiC2 and Ti3AlC2 Single-Phase MAX Phases in Mechanically Activated Mixtures of Initial Reactants

Unveiling the Precipitation Behavior and Mechanical Properties in G-phase Strengthened CrFe2Ni2Ti0.2Six Multi-Principal Element Alloys

In situ synthesis and mechanical properties of bulk Ti3SiC2/TiC composites by SHS/PHIP

Preparation and performance of MAX phase Ti3AlC2 by in-situ reaction of Ti-Al-C system

Preparation of Ti3AlC2 and Ti2AlC by self-propagating high-temperature synthesis and study on the reaction mechanism

Unveiling the phase evolution and mechanical properties of Ni1.5Co1.5CrTix alloys with ultrafine/nano structure

Phase Assembly of Ti2SnC Powders

Structure and Phase Composition of SHS Products in Powder Mixtures of Titanium, Carbon, and Aluminum

Preparation of Ternary Layered Ti3SiC2 Ceramic by SHS/PHIP

Self-propagating high-temperature synthesis of TiC-TiB2 multiphase ceramics

Synthesis and Properties of AlN-SiC-TiB2 Ceramics by SHS-HIP

Self-Propagating High-Temperature Synthesis in a Ti−Al−C Powder System Using Different Carbon Precursors

Self-Propagating High-Temperature Synthesis of the Ti3SiC2 MAX Phase Using Various Forms of Carbon

(Cr2/3Ti1/3)3AlC2 and (Cr5/8Ti3/8)4AlC3: New MAX‐phase Compounds in Ti–Cr–Al–C System

Pressureless manufacturing of high purity Ti3AlC2 MAX phase material: Synthesis and characterisation