Abstract:In this study, it was verified that the synthesis of a Ti‐Al‐C MAX phase has advantages when using intermetallic compounds rather than using only elemental powders. The formation behavior of the MAX phase was presented through diffusion experiments. In the case of using elemental powder, Ti2AlC is produced at 1,300°C, and Ti3AlC2 is produced at 1,400°C. When intermetallic compounds are used, Ti2AlC is produced at 1,000°C, and Ti3AlC2 is produced at 1,300°C. In the case of the elemental powder, it is verified that Ti3AlC2 content is decreased and Ti2AlC is increased when heat treatment is performed at 1,400°C for 3 h. Rather Ti3AlC2 content is increased when intermetallic compounds are used. When an intermetallic compound is used, synthesis occurs more actively at high temperatures, and the tendency to be thermally decomposed can be prevented. When TiAl and TiC are heat treated, Al of the intermetallic compound is diffused into TiC, and C of TiC is diffused into the intermetallic compound. Furthermore, there are many two‐dimensional defects in TiAl, which act as a C diffusion channel. C diffuses into TiAl to produce TiCX, and the MAX phase is generated by the short‐range diffusion of Al. In the case of TiC, TiC transform into TiCX after C diffuses into TiAl, which consequently structure of TiC changes from Cubic to Hexagonal. This is the same crystal structure as the MAX phase, and it is confirmed that the (110) surface is maintained. A Ti‐C layer structure of the (110) surface is maintained, and it was determined that Al is diffused during this time to generate MAX phase. This article is protected by copyright. All rights reserved

Self-Propagating High-Temperature Synthesis of Ti3SiC2 and Ti3AlC2 Single-Phase MAX Phases in Mechanically Activated Mixtures of Initial Reactants

Self-Propagating High-Temperature Synthesis in a Ti−Al−C Powder System Using Different Carbon Precursors

Rapid synthesis of high‐yield Ti3AlC2 MAX phase powders from TiC0.67 and Al with induction heating assistance

Self-Propagating High-Temperature Synthesis of the Ti3SiC2 MAX Phase Using Various Forms of Carbon

Formation of M N +1 AX N Phases in Ti–Cr–Al–C Systems by Self-Propagating High-Temperature Synthesis

Synthesis of low-cost Ti3AlC2-Ti2AlC dual MAX phase with high-electrical conductivity using economical raw materials and novel compositions

Preparation and performance of MAX phase Ti3AlC2 by in-situ reaction of Ti-Al-C system

Formation of Mn＋lAXn Phases in Ti-Cr-AI-C Systems by Self-Propagating High-Temperature Synthesis

Synthesis of MAX Phases in the Ti2AlC–V2AlC System as Precursors of Heterometallic MXenes Ti2 – xVxC

Preparation of Ti3AlC2 and Ti2AlC by self-propagating high-temperature synthesis and study on the reaction mechanism

Nb2AlC MAX phase synthesis by SHS metallurgy

Synthesis and Reaction Path of Ti‐Al‐C MAX Phase by Reaction with Ti‐Al Intermetallic Compounds and TiC

Preparation of Ti 3 AlC 2 and Ti 2 AlC by self-propagating high-temperature synthesis

Pressureless manufacturing of high purity Ti3AlC2 MAX phase material: Synthesis and characterisation

Molten Salt Dynamic Sealing Synthesis of MAX Phases (ti3alc2, Ti3SiC2 Et Al.) Powder in Air

Rapid Synthesis of Bulk Ti2alc by Self-Propagating High Temperature Combustion Synthesis with A Pseudo-Hot Isostatic Pressing Process

In Situ Synthesis of Al–TiC in Aluminum Melt

PREPARATION OF Ti3AlC2 AND Ti2AlC BY SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS AND STUDY ON MECHANISM OF THE REACTION

Ti2SnC MAX Phase Directly Synthesized by High-Temperature Ball Milling

(Cr2/3Ti1/3)3AlC2 and (Cr5/8Ti3/8)4AlC3: New MAX‐phase Compounds in Ti–Cr–Al–C System

Mechanosynthesis Mechanism of Tic Powders