Abstract:In this study, an AlTiVCr compositionally complex alloy with a high hardness of 865 ± 34 HV was prepared by a one-step self-propagating high-temperature synthesis (SHS) method using TiO 2 , V 2 O 5 , Cr 2 O 3 , and Al as starting materials. Experimental results confirmed the formation of a two-phase alloy having BCC solid solution dendritic grains reinforced by a Ti-rich intermetallic phase. Elemental analysis results confirmed that the Ti at.% in the synthesized alloy was lower than other elements. The addition of extra TiO 2 to the reactants, pre-milling of the TiO 2 -Al mixture, and using the Rutile polymorph of TiO 2 instead of Anatase as the starting material increased the atomic percent of Ti. The composition of the proper synthesized alloy was formulated as Al 27.3 Ti 17.2 V 28.7 Cr 26.8 which is close to the desired AlTiVCr alloy. To clarify the reaction sequence during the SHS, the binary mixtures were analyzed by thermal analysis. It was postulated that the melting of Al facilitated the reduction reaction of Cr 2 O 3 and V x O y compounds, while TiO 2 was the last oxide compound reduced by Al. This hindered the completion of the TiO 2 reduction reaction and as a consequence, the unreacted TiO 2 entered the slag which lowered the concentration of Ti in the composition of the final alloy.

Preparation of Ti 3 AlC 2 and Ti 2 AlC by self-propagating high-temperature synthesis

Preparation of Ti3AlC2 and Ti2AlC by self-propagating high-temperature synthesis and study on the reaction mechanism

PREPARATION OF Ti3AlC2 AND Ti2AlC BY SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS AND STUDY ON MECHANISM OF THE REACTION

Preparation of Al–TiC Composites by Self-Propagating High-Temperature Synthesis

Self-Propagating High-Temperature Synthesis in a Ti−Al−C Powder System Using Different Carbon Precursors

Effect of Sn and Si on the Synthesis of Ti<sub>3</sub>Al(Sn/Si)C<sub>2</sub> by Self-Propagating High-Temperature Sintering

In Situ Synthesis of Al–TiC in Aluminum Melt

A possible mechanism on synthesis of Ti3AlC2

A novel simple method to stably synthesize Ti3AlC2 powder with high purity

Synthesis of high pure Ti3AlC2 and Ti2AlC powders from TiH2 powders as Ti source by tube furnace

Formation mechanism of Ti3AlC2 in TiO2–Al–C/TiC systems at high temperatures

Al3Ti/Al composites prepared by SHS

Mathematical and experimental investigation of the self-propagating high-temperature synthesis (SHS) of TiAl3 and Ni3Al intermetallic compounds

Kinetics and numerical simulation of self-propagating high-temperature synthesis in Ti–Cr–Al–C systems

Synthesis Of High-Purity Powder Ti3alc2 Materials By Pressureless Sintering

Synthesis and mechanical properties of Ti 3 AlC 2 by spark plasma sintering

Self-Propagating High-Temperature Synthesis of Ti3SiC2 and Ti3AlC2 Single-Phase MAX Phases in Mechanically Activated Mixtures of Initial Reactants

Self-Propagating High Temperature Synthesis (SHS) of Intermetallic Compounds Titanium and Nickel Aluminides

Formation of M N +1 AX N Phases in Ti–Cr–Al–C Systems by Self-Propagating High-Temperature Synthesis

Preparation of a hard AlTiVCr compositionally complex alloy by self-propagating high-temperature synthesis

Combustion synthesis of ternary carbide Ti3AlC2 in Ti–Al–C system