Abstract:In this study, it was verified that the synthesis of a Ti‐Al‐C MAX phase has advantages when using intermetallic compounds rather than using only elemental powders. The formation behavior of the MAX phase was presented through diffusion experiments. In the case of using elemental powder, Ti2AlC is produced at 1,300°C, and Ti3AlC2 is produced at 1,400°C. When intermetallic compounds are used, Ti2AlC is produced at 1,000°C, and Ti3AlC2 is produced at 1,300°C. In the case of the elemental powder, it is verified that Ti3AlC2 content is decreased and Ti2AlC is increased when heat treatment is performed at 1,400°C for 3 h. Rather Ti3AlC2 content is increased when intermetallic compounds are used. When an intermetallic compound is used, synthesis occurs more actively at high temperatures, and the tendency to be thermally decomposed can be prevented. When TiAl and TiC are heat treated, Al of the intermetallic compound is diffused into TiC, and C of TiC is diffused into the intermetallic compound. Furthermore, there are many two‐dimensional defects in TiAl, which act as a C diffusion channel. C diffuses into TiAl to produce TiCX, and the MAX phase is generated by the short‐range diffusion of Al. In the case of TiC, TiC transform into TiCX after C diffuses into TiAl, which consequently structure of TiC changes from Cubic to Hexagonal. This is the same crystal structure as the MAX phase, and it is confirmed that the (110) surface is maintained. A Ti‐C layer structure of the (110) surface is maintained, and it was determined that Al is diffused during this time to generate MAX phase. This article is protected by copyright. All rights reserved

Self-Propagating High-Temperature Synthesis of the Ti3SiC2 MAX Phase Using Various Forms of Carbon

Self-Propagating High-Temperature Synthesis of Ti3SiC2 and Ti3AlC2 Single-Phase MAX Phases in Mechanically Activated Mixtures of Initial Reactants

Formation of M N +1 AX N Phases in Ti–Cr–Al–C Systems by Self-Propagating High-Temperature Synthesis

Synthesis and Reaction Path of Ti‐Al‐C MAX Phase by Reaction with Ti‐Al Intermetallic Compounds and TiC

Self-Propagating High-Temperature Synthesis in a Ti−Al−C Powder System Using Different Carbon Precursors

Reaction Mechanism of Ti<SUB>3</SUB>SiC<SUB>2</SUB> Formed on the Diamond

Synthesis of Ti3alc2 Max Phase Under Vacuum, its Structural Characterisation and Using for Ti3c2tx Mxene Preparation

Formation of Mn＋lAXn Phases in Ti-Cr-AI-C Systems by Self-Propagating High-Temperature Synthesis

Effect of Sn and Si on the Synthesis of Ti<sub>3</sub>Al(Sn/Si)C<sub>2</sub> by Self-Propagating High-Temperature Sintering

Pressureless manufacturing of high purity Ti3AlC2 MAX phase material: Synthesis and characterisation

Effect of High-Temperature Annealing on the Structure and Properties of a Composite Material Based on TiC/TiB2/Ti3SiC2

Phase stability of SiC against Ti at high temperature

Ti 5 Al 2 C 3: A new ternary carbide belonging to MAX phases in the Ti - Al - C system

Synthesis of MAX Phases in the Ti2AlC–V2AlC System as Precursors of Heterometallic MXenes Ti2 – xVxC

Self-propagating High Temperature Synthesis of Intragranular TiC-Ti3AlC2composites

In situ synthesis and mechanical properties of bulk Ti3SiC2/TiC composites by SHS/PHIP

Synthesis of Sialon-Ti(N,C) Composites Via Carbothermal Reduction-Nitridation from Pyrophyllite and Rutile

Porous Ti3AlC2 MAX phase enables efficient synthesis of Ti3C2Tx MXene

Synthesis of Ti3(SnxAl1−x)C2 solid solutions over the whole composition range

The Elusive member of the Ti-Al-C MAX family- Ti4AlC3

Direct Synthesis of Controllable Microstructures of Thermally Stable and Ordered Mesoporous Crystalline Titanium Oxides and Carbide/Carbon Composites