Abstract:In this work, the intentional insertion of slots in metal gate (MG) is introduced to solve the dishing issue for the double-diffused drain MOSFET (DDDMOSFET) fabrication. For traditional DDDMOSFET, the gate oxide layer in slots will be reserved to improve the device reliability, which requires an additional photomask to screen the gate/slot regions during the following sidewall formation and source/drain (S/D) implantation. This makes the process more complicated with increased cost. Without that additional photomask, it is proposed that the removal of gate oxide layer in slots can directly allow the floating S/D formation and the followed Ni silicidation there. It is demonstrated that such a novel process can not only relieve the MG dishing issue but can also effectively result in ~16% higher ON current and comparable OFF current for both N- and P-DDDMOSFETs without threshold voltage shift after applying electrical stress on gates. It is also revealed that the floating silicided S/Ds in slots have negligible influence on device breakdown characteristics. By saving one photomask, this work proposes a novel solution for the effective integration of core devices with very small feature sizes and high-voltage (HV) devices with large feature sizes in the same die, which is a common challenge for display driver chip fabrication using high- ${k}$ /MG (HK/MG) technology.

Fully depleted SOI devices with TiN gate and elevated source-drain structures

Simulation for a Novel Vertical SOI Configuration

A Path to Energy Efficiency and Reliability for ICs: Fully Depleted Silicon-on-Insulator (FD-SOI) Devices Offer Many Advantages

Drain and Source on Insulator MOSFETs Fabricated by Local SIMOX Technology

High Performance Junctionless FDSOI SiGe Channel P-Finfet with High ION/IOFF Ratio and Excellent SS

Experimental Results on Drain and Source on Insulator MOSFETs Fabricated by Local SIMOX Technology

0.25 Mm SOI RF nMOSFETs depleted partially

The Simulation Analysis of Thick Film Fully Depleted SOI MOSFET Implemented by Anti-Doped Silicon Island

A study of source/drain-on-insulator structure for extremely scaled MOSFETs

Analysis and Optimization of SDOI Structure to Maximize the Intrinsic Performance of Extremely Scaled MOSFETs

DDDMOSFET Performance Improvement by Gate Oxide Removal Followed by Silicided Source/Drain Formation in Gate Slots

Advances in Fully Depleted CMOS/SOI Technology

Comparison of the Characteristics of DSOI, SOI and Bulk-Si MOSFETs

Recessed source/drain for scaling SOI MOSFET to the limit

Double-gate SOI MOSFET Fabrication from Bulk Silicon Wafer

Floating Body Effect in Partially Depleted SOI nMOSFET with Asymmetric Structure and Ge-Implantation

Study of full isolation SOI technology by highly selective and self-stopping formation of porous oxidized silicon

T-Shaped Body Silicon-on-Insulator (SOI) MOSFET

An elevated source/drain-on-insulator structure to maximize the intrinsic performance of extremely scaled MOSFETs

Silicide As Diffusion Source For Dopant Segregation In 70-Nm Mosfets With Ptsi Schottky-Barrier Source/Drain On Ultrathin-Body Soi

Performance evaluation of FD-SOI Mosfets for different metal gate work function