Abstract:In this paper, we propose a simulation-based novel Split-Gate Trench MOSFET structure with an optimized fabrication process to enhance power efficiency, switching speed, and thermal stability for high-performance semiconductor applications. Integrating high-k pillars with superjunction structures beneath the split gate enhancing breakdown performance by reducing critical field intensity by up to 35%, the device achieves a 15% improvement in Figures of Merit (FOMs) for BV2/Ron,sp. Dynamic testing reveals approximately a 25% reduction in both input and output capacitance, as well as gate-to-drain charge (QGD). This reduction, coupled with an approximately 40% improvement in Baliga's High-Frequency Figure of Merit (BHFFOM) and over 20% increase in the New High-Frequency Figure of Merit (NHFFOM), underscores the design's suitability for high-speed, high-efficiency power electronics. Simulations examining the effects of high-k pillar depth indicate that an optimal depth of 3.5 um achieves a balanced performance between BV and Ron,sp. The influence of high-k materials on BT-Hk-SJ MOSFET performance was investigated by comparing hafnium dioxide (HfO2), nitride, and oxynitride. Among these, HfO2 demonstrated optimal performance across static, dynamic, and diode characteristics due to its high dielectric constant, while material choice had minimal impact, with variations kept within 5%.

Study on 3.3 kV Super Junction Field Stop Insulated Gate Bipolar Transistor According to Design and Process Parameters

The Optimal Design of Field Ring for Reliability and Realization of 3.3 kV Insulated-Gate Bipolar Transistor Power Semiconductor

A Novel High-Voltage Trench Gate Insulated Gate Bipolar Transistor With Diffusion Remnant Layer

An Experimental And Numerical Investigation Of Igbt Blocking Characteristics

Experimental Study of the Anode Injection Efficiency Reduction of 3.3-Kv-class Npt-Igbts Due to Backside Processes

Optimum design of 1.4 kV trench IGBTs-the next generation of high power switching devices

Optimum Design of 1.4kv Non-Punch-Through Trench Igbts: the Next Generation of High-Power Switching Devices

The trench Insulated Gate Bipolar Transistor— a high power switching device

Design and Process Analysis of a Split-Gate Trench Power MOSFET with Bottom-Trench Hk-Pillar Superjunction for Enhanced Performance

A Coupled 3D Finite Element-Circuit Model for the Numerical Analysis of Small Time Scale Transients of an Insulated Gate Bipolar Transistor Power Electronics Device

A Network Topological Approach-Based Transient 3-D Electrothermal Model of Insulated-Gate Bipolar Transistor

Design and Simulation of a Novel Gate Bipolar Transistor Device—FS-CIGBT

1.2 Kv Trench Insulated Gate Bipolar Transistors (igbt's) with Ultralow On-Resistance

Analysis of the Breakdown Mechanism and Characteristics of Super-Junction

Design Optimization and Reliability Evaluation in 1.2 kV SiC Trench MOSFET with Deep P Structure

A novel split gate trench MOSFET with high-k pillar embedded for higher breakdown voltage

Simulation Study of a Low ON-State Voltage Superjunction IGBT with Self-Biased PMOS

Development of 3 300 V SiC SBD and Hybrid Power Module

Design and process simulation on power device igbt

Investigation on Short-Circuit Characterization and Optimization of 3.3-kV SiC MOSFETs

Simulation Study on Single-Event Burnout Reliability of 4H-Sic Trench Gate MOSFET with Combined P-buried Layer