Abstract:High-voltage p-channel 4H-SiC insulated gate bipolar transistors (IGBTs) have been fabricated and characterized. The devices have a forward voltage drop of 7.2 V at 100 A/cm2 and a -16 V gate bias at 25 'C, corresponding to a specific on-resistance of 72 run. CM2 and a differential on-resistance of 26mQ - CM2. Hole mobility of 12 CM2/V. s in the inversion channel with a threshold voltage of -6 V was. achieved by optimizing the n+ well doping profile and gate oxidation process. A novel current enhancement layer was adopted to reduce the KET resistance and enhance conductivity modulation by improving hole current spreading and suppressing the electron current conduction through the top n-p-n transistor. Inductive switching results have shown that the p-IGBT exhibited a turn-off time of -1 ps and a turn-off energy loss of 12 mj at 4-kV dc-link voltage and 6-A load current at 25 'C. The turn-off trajectory from the measured inductive load switching waveforms and numerical simulations shows that the p-IGBT had a near-square reverse bias safe operating area. Numerical simulations have been conducted to achieve an improved tradeoff betweenforward voltage drop and switching off energy by investigating the effects of drift layer lifetime and p-buffer layer parameters. The advantages of SiC p-IGBTs, such as the potential of very low ON-state resistance, slightly positive temperature coefficient, high switching speed, small switching losses, and large safe operating area, make them suitable and attractive for high-power high-frequency applications.

Design and process simulation on power device igbt

Research Of Designing For The High Voltage Device In Cmos Hv-Ic

Optimum design of 1.4 kV trench IGBTs-the next generation of high power switching devices

An Experimental And Numerical Investigation Of Igbt Blocking Characteristics

Optimum Design of 1.4kv Non-Punch-Through Trench Igbts: the Next Generation of High-Power Switching Devices

Design and Simulation of a Novel Gate Bipolar Transistor Device—FS-CIGBT

2-D Modelling and Optimisation of Trench Insulated Gate Bipolar Transistors (TIGBT)

1200-V Trench-FS IGBT: Process-Based Modeling and Short-Circuit Safe Operating Area (SCSOA) Optimization with the TOPSIS Method

Voltage Balancing Optimization of Series-Connected Igbts in Solid-State Breaker by Using Driving Signal Adjustment Technique

A Simple Method to Design the Single-Mask Multi-Zone Junction Termination Extension for High-Voltage IGBT

Study and Optimization of Field Limiting Rings for 10kV SiC Insulated Gate Bipolar Transistor

A simulation of IGBT module under power cycling test condition

Multi-Physics Field Simulation of Electro-Thermal-Stress of IGBT Device Based on Al/Diamond Material

Structure Design and Analysis of High Voltage IGBTs Series Connection Experimental Platform

Diamond-on-Si IGBT With Ultrahigh Breakdown Voltage and On-State Current

Efficient Automatic Design of IGBT Structural Parameters Using Differential Evolution and Machine Learning Model

Design and Characterization of High-Voltage 4H-Sic P-Igbts

Modeling and Simulating for IGBT Based on PSIM

Design and Optimization of Linearly Graded-Doping Junction Termination Extension for 3.3-Kv-class Igbts

Design and Optimization of Power Devices in A Bcd Process

Physical Model Analysis During Transient for Series-Connected HVIGBTs