Abstract:The silicon carbide (SiC) devices have faster switching speed than that of the conventional silicon (Si) devices, which however may cause excessive device voltage overshoot. Larger gate resistance can help to restrain the overshoot, it however slows down the switching speed and increases switching losses. There are other methods that can mitigate the voltage overshoot, e.g., using low-inductance busbars, adding snubber circuits, etc. In this article, the busbar design for a 250-kW SiC three-level T-type inverter is investigated. The current commutation loops (CCLs) are first analyzed using a single-phase equivalent circuit. Then the detailed busbar design methods, especially a 3-D busbar design concept, are proposed to select the optimal stacking order for the multilayer laminated busbar and to address constraints posed by the physical terminal arrangements of SiC modules and dc-link capacitors. The stray inductance in each CCL is extracted via a finite element analysis and validated on the actual inverter busbar prototypes using an impedance analyzer. To further minimize the busbar stray inductance, a hybrid busbar structure with printed circuit board based buffer circuit using high-frequency decoupling capacitors is designed and evaluated in this article. Finally, the effectiveness of the designed busbars as well as the buffer circuit are validated using experimental studies.

Structure Design and Analysis of High Voltage IGBTs Series Connection Experimental Platform

Key technologies on series connection of insulated gate bipolar transistors

Design of a 200kVA Soft-switching IGBT Three-phase Inverter

Study And Design Of Noninductive Bus Bar For High Power Switching Converter

Laminated busbar design and stray parameter analysis of three-level converter based on HVIGBT series connection

Study On Planar Busbar Regarding Stray Inductance Minimization And Oscillation Suppression For High Power Converter

Busbar Optimization Design for High Power Converters

The large-size low-stray-parameter planar bus bar for high power IGBT-based inverters

Study on DC Busbar Structure Considering Stray Inductance for the Back-to-back IGBT-based Converter

Design, Simulation and Analysis of the Low Stray Inductance Bus Bar for Voltage Source Inverters

Parallel technique for IGBT modules applied in high-power converter

Parameter Design of a Three-Level Converter Based on Series-Connected HV-IGBTs

Low Stray Inductance Busbar Design and Optimization for SiC-Based Three-Level Device

Busbar Design and Optimization for Voltage Overshoot Mitigation of a Silicon Carbide High-Power Three-Phase T-Type Inverter

Optimum design of 1.4 kV trench IGBTs-the next generation of high power switching devices

Operating Principles of Series-Connected IGBTs Based on Active Clamping Circuit in Voltage Source Converters

Improvement for Planar Bus Bars of High Power Inverters Based on Segmented Evaluation of Stray Parameters

Busbar Design for High-Power SiC Converters

Behavior model for series connected high voltage IGBTs

Engineering Design for Structure and Bus Bar of 1.2MV·A Hybrid Clamped Five-Level Converter Module

Optimal Busbar Design for the Press-Packed IGBT-Based Modular Multilevel Converter Submodule Considering Both Normal and Fault Ride-Through Conditions