Abstract:Silicon Carbide (SiC) MOSFETs have gained significant attention in power electronics for their superior characteristics. Despite advances in 1.2kV SiC MOSFET generations, a comprehensive comparative analysis of different device types remains limited. This study examines the short-circuit (SC) behavior of 1.2kV SiC MOSFETs across multiple vendors and generations, including planar and trench structures. Key metrics such as Short Circuit Withstand Time (SCWT), SC energy, SC peak power, SC energy density, and SC current density were evaluated at DC bus voltages of 400V, 600V, and 800V. Our findings reveal that third-generation (3G) devices exhibit inferior SC performance due to smaller die areas that impede heat dissipation, with 800V survival times as low as 2.25 μs for GeneSiC-3G. In contrast, trench-based designs showed improved resilience. Infineon-1G, with an active area 44.3% smaller than Littelfuse-1G and 45% smaller than CREE-2G, achieved comparable SCWT (4.5 μs vs. 4.5 μs for Littelfuse and 4 μs for CREE-2G) while demonstrating superior thermal management, with a SC energy density of 0.096 J/mm² and current density of 41.74 A/mm² at 800V. Similarly, another trench device, Rohm-3G, outperformed planar 3G devices, with a SCWT of 3.5 μs and peak power of 110 kW at 800V. Post-SC failure mechanisms were systematically analyzed using optical microscopy, Lock-In Thermal Emission Microscopy (LITEM), and Focused Ion Beam (FIB), revealing gate leakage paths and damage in the active regions and two-finger area. These findings offer significant insights into the trade-offs between on-state performance and SC robustness, providing manufacturers and designers with crucial guidance for developing optimized SiC MOSFET designs for high-power applications.

Design Optimization and Reliability Evaluation in 1.2 kV SiC Trench MOSFET with Deep P Structure

A comprehensive analysis of breakdown mechanisms in 4H-SiC MOSFET and JFET

Evaluation of Trench Oxide Protection Techniques on Ultra High Voltage (10 kV) 4H-SiC UMOSFETs

A Novel SiC Trench MOSFET Structure with Enhanced Short Circuit Robustness

Design of 1.2 kV SiC trench MOSFET using tilted ion implantation for suppression of electric field crowding at the bottom of the gate oxide

4H-Sic Trench Gate Lateral MOSFET with Dual Source Trenches for Improved Performance and Reliability

An Investigation of Body Diode Reliability in Commercial 1.2 kV SiC Power MOSFETs with Planar and Trench Structures

Design of a 1.2 kV SiC MOSFET with Buried Oxide for Improving Switching Characteristics

Influence of Different Device Structures on the Degradation for Trench-Gate SiC MOSFETs: Taking Avalanche Stress as an Example

4H-Sic Trench Gate Lateral MOSFET with Deep-Shallow Source Trench for Improved RESURF Dose Window and Reduced Oxide Field

TCAD Analysis of Single-Event Burnout Hardness for an Improved CoolSiC Trench MOSFET

Design and Process Analysis of a Split-Gate Trench Power MOSFET with Bottom-Trench Hk-Pillar Superjunction for Enhanced Performance

Improved Blocking and Switching Characteristics of Split-Gate 1.2kV 4H-SiC MOSFET with a Deep P-well

Simulation Study of Single-Event Burnout Reliability for 1.7-kV 4H-SiC VDMOSFET

A Comprehensive Analysis of Unclamped-Inductive-Switching-Induced Electrical Parameter Degradations and Optimizations for 4H-SiC Trench Metal-Oxide-Semiconductor Field-Effect Transistor Structures

Investigations of 4H‐SiC trench MOSFET with integrated high‐K deep trench and gate dielectric

Comprehensive Short Circuit Behavior and Failure Analysis of 1.2kv SiC MOSFETs Across Multiple Vendors and Generations

A Study on the Electrical Properties of High Voltage SiC Power MOSFET with Double Trench Structures

Over dV/dt Robustness of Switching Behavior of SiC MOSFET and a Novel Main Junction Region Design

1.2-Kv Planar SiC MOSFETs with Improved Short-Circuit Capability by Adding Plasma Spreading Layer

SiC double-trench MOSFETs with source-recessed structure for enhanced ruggedness