Abstract:In this paper, the single-event burnout (SEB) and reinforcement structure of 1200 V SiC MOSFET (SG-SBD-MOSFET) with split gate and Schottky barrier diode (SBD) embedded were studied. The device structure was established using Sentaurus TCAD, and the transient current changes of single-event effect (SEE), SEB threshold voltage, as well as the regularity of electric field peak distribution transfer were studied when heavy ions were incident from different regions of the device. Based on SEE analysis of the new structural device, two reinforcement structure designs for SEB resistance were studied, namely the expansion of the P+ body contact area and the design of a multi-layer N-type interval buffer layer. Firstly, two reinforcement schemes for SEB were analyzed separately, and then comprehensive design and analysis were carried out. The results showed that the SEB threshold voltage of heavy ions incident from the N+ source region was increased by 16% when using the P+ body contact area extension alone; when the device is reinforced with a multi-layer N-type interval buffer layer alone, the SEB threshold voltage increases by 29%; the comprehensive use of the P+ body contact area expansion and a multi-layer N-type interval buffer layer reinforcement increased the SEB threshold voltage by 33%. Overall, the breakdown voltage of the reinforced device decreased from 1632.935 V to 1403.135 V, which can be seen as reducing the remaining redundant voltage to 17%. The device's performance was not significantly affected.

Simulation Study of Single-Event Burnout Reliability for 1.7-kV 4H-SiC VDMOSFET

Single-Event Burnout Hardening Method and Evaluation in SiC Power MOSFET Devices

Simulation Study of Single-Event Effects for the 4H-SiC VDMOSFET With Ultralow On-Resistance

Simulation Study on Single-Event Burnout in Rated 1.2-kV 4H-SiC Super-Junction VDMOS

TCAD Analysis of Single-Event Burnout Hardness for an Improved CoolSiC Trench MOSFET

Research of Single-Event Burnout in 1.2-kV Rated CoolSiC Trench MOSFET

Simulation Study of Single-Event Burnout in 1.5-kV 4H-SiC JTE Termination

Single-event burnout resilient design of 4H-SiC MOSFETs through staircase-like buffer layer

Total Ionizing Dose Effect and Single Event Burnout of VDMOS with Different Inter Layer Dielectric and Passivation.

A Simulation-Based Comparison Between Si and SiC MOSFETs on Single-Event Burnout Susceptibility

Research on Single-Event Burnout Reinforcement Structure of SiC MOSFET

Simulation Study of Single-Event Burnout in GaN MISFET With Schottky Element

Analysis of Single Event Response and Hardening Methods in 1.2 kV SiC Power MOSFET With Multicell and Termination Structure

Study on the Single-Event Burnout Effect Mechanism of SiC MOSFETs Induced by Heavy Ions

Experimental and simulation studies of radiation‐induced single event burnout in SiC‐based power MOSFETs

Single-event Burnout Effect on Radiation-hardened High-voltage NMOS

Simulation studies of Single Event Effects in Ga$_2$O$_3$ MOSFETs

A Source Segmented LDMOS Structure for Improving Single Event Burnout Tolerance Based on High-Voltage BCD Process

Study of the mechanism of single event burnout in lateral depletion-mode Ga2O3 MOSFET devices via TCAD simulation

Design Optimization and Reliability Evaluation in 1.2 kV SiC Trench MOSFET with Deep P Structure

A comprehensive analysis of breakdown mechanisms in 4H-SiC MOSFET and JFET