Abstract:In this paper, the single-event burnout (SEB) and reinforcement structure of 1200 V SiC MOSFET (SG-SBD-MOSFET) with split gate and Schottky barrier diode (SBD) embedded were studied. The device structure was established using Sentaurus TCAD, and the transient current changes of single-event effect (SEE), SEB threshold voltage, as well as the regularity of electric field peak distribution transfer were studied when heavy ions were incident from different regions of the device. Based on SEE analysis of the new structural device, two reinforcement structure designs for SEB resistance were studied, namely the expansion of the P+ body contact area and the design of a multi-layer N-type interval buffer layer. Firstly, two reinforcement schemes for SEB were analyzed separately, and then comprehensive design and analysis were carried out. The results showed that the SEB threshold voltage of heavy ions incident from the N+ source region was increased by 16% when using the P+ body contact area extension alone; when the device is reinforced with a multi-layer N-type interval buffer layer alone, the SEB threshold voltage increases by 29%; the comprehensive use of the P+ body contact area expansion and a multi-layer N-type interval buffer layer reinforcement increased the SEB threshold voltage by 33%. Overall, the breakdown voltage of the reinforced device decreased from 1632.935 V to 1403.135 V, which can be seen as reducing the remaining redundant voltage to 17%. The device's performance was not significantly affected.

Simulation Study of Single-Event Burnout in 1.5-kV 4H-SiC JTE Termination

Simulation Study on Single-Event Burnout in Rated 1.2-kV 4H-SiC Super-Junction VDMOS

Simulation Study of Single-Event Burnout Reliability for 1.7-kV 4H-SiC VDMOSFET

Single-Event Burnout Hardness for the 4H-Sic Trench-Gate MOSFETs Based on the Multi-Island Buffer Layer

Research of Single-Event Burnout in 1.2-kV Rated CoolSiC Trench MOSFET

Analysis of Single Event Response and Hardening Methods in 1.2 kV SiC Power MOSFET With Multicell and Termination Structure

Simulation Study on Single-Event Burnout Reliability of 4H-Sic Trench Gate MOSFET with Combined P-buried Layer

Experimental and simulation studies of radiation‐induced single event burnout in SiC‐based power MOSFETs

Investigation and improvement of single-event burn-out in 4H-SiC trench insulated gate bipolar transistors

High Single-Event Burnout Resistance 4H-Sic Junction Barrier Schottky Diode

Single-Event Burnout Hardening Method and Evaluation in SiC Power MOSFET Devices

A Compact Circuit-Level Model for Single-Event Burnout in SiC Power MOSFET Devices

Simulation Study of Single-Event Effects for the 4H-SiC VDMOSFET With Ultralow On-Resistance

TCAD Analysis of Single-Event Burnout Hardness for an Improved CoolSiC Trench MOSFET

Research of Single-Event Burnout in 4H-Sic JBS Diode by Low Carrier Lifetime Control

Research on Single-Event Burnout Reinforcement Structure of SiC MOSFET

A Simulation-Based Evaluation of Single-Event Burnout Mechanisms and Varied SEB Hardening Designs in Power LDMOS Transistors

A Simulation-Based Comparison Between Si and SiC MOSFETs on Single-Event Burnout Susceptibility

Single-event burnout resilient design of 4H-SiC MOSFETs through staircase-like buffer layer

Simulation studies of Single Event Effects in Ga$_2$O$_3$ MOSFETs

Single-Event Effects in SiC Power MOSFET Induced by Pulsed-Laser Two Photon Absorption