Abstract:In the present paper, the ZrB2/h-BN multiphase ceramics were fabricated by SPS (spark plasma sintering) technology at lower sintering temperature using h-BN, ZrO2, AlN and Si as raw materials and B2O3 as a sintering aid. The phase constitution and microstructure of specimens were analyzed by XRD and SEM. Moreover, the effects of different sintering pressures on the densification, microstructure and mechanical properties of ZrB2/h-BN multiphase ceramics were also systematically investigated. The results show that the ZrB2 was obtained through solid phase reaction at different sintering pressures, and increasing sintering pressure could accelerate the formation of ZrB2 phase. As the sintering pressure increasing, the fracture strength and toughness of the sintered samples had a similar increasing tendency as the relative density. The better comprehensive properties were obtained at given sintering pressure of 50MPa, and the relative density, fracture strength and toughness reached about 93.4%, 321MPa and 3.3MPa·m1/2, respectively. The SEM analysis shows that the h-BN grains were fine and uniform, and the effect of sintering pressure on grain size was inconspicuous. The distribution of grain is random cross array, and the fracture texture was more obvious with the increase of sintering pressure. The fracture mode of sintered samples remained intergranular fracture mechanism as sintering pressure changed, and the grain refinement, grain pullout and crack deflection helped to increase the mechanical properties.

The Study on the Property and the Microstructure of Pressureless Sintered h-BN Ceramics

The Study on the Property and the Microstructure of Pressureless Sintered h-BN Ceramics

Microstructure and Mechanical Properties of ZrB2/h-BN Multiphase Ceramics by Low-Temperature Reactive Sintering

Effect of Hexagonal BN on the Microstructure and Mechanical Properties of Pressureless Sintered Porous Si3N4 Ceramics

Influence of hot-press sintering parameters on microstructures and mechanical properties of h-BN ceramics

Analysis of Mechanical Properties of Al2O3‐cBN‐hBN Composites and Identification of Main Influencing Factors

Physical and mechanical properties of hexagonal boron nitride ceramic fabricated by pressureless sintering without additive

Microstructure and mechanical properties of h-BN–SiC ceramic composites prepared by in situ combustion synthesis

Microstructure evolution and grain growth mechanisms of h-BN ceramics during hot-pressing

Influence of sintering pressure on the crystallization and mechanical properties of BN-MAS composite ceramics

Microstructural Evolution of H-BN Matrix Composite Ceramics With Amorphous La2O3-Al2O3-SiO2 Glass Phase During Hot Pressing

Microstructure and room/elevated-temperature mechanical properties of hot-pressed h-BN composite ceramics with La2O3-Al2O3-SiO2 addition

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

Microstructural Evolution of H-BN&nbsp;Matrix Composite Ceramics With Amorphous La2O3-Al2O3-SiO2&nbsp;Glass Phase During Hot Pressing

Effect of Infiltration-and Pyrolyzation-Treatment on Mechanical Properties of Pressureless Sintered SiC/h-BN Ceramics

Microstructural evolution of h-BN matrix composite ceramics with La-Al-Si-O glass phase during hot-pressed sintering

Effects of h-BN addition on microstructures and mechanical properties of β-CaSiO3 bioceramics

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

Fabrication and Properties of Pressureless Sintered Si3N4/BN Composite Ceramics with La2O3-Al2O3-Y2O3 as Sintering Additives

Microstructure and mechanical properties of AlN–hBN based machinable ceramics prepared by pressureless sintering

Effect Of H-Bn Content On The Sintering Properties Of Sic-Yag-Bn Multiphase Ceramics

The Study on the Property and the Microstructure of Pressureless Sintered h-BN Ceramics

The Study on the Property and the Microstructure of Pressureless Sintered h-BN Ceramics

Microstructure and Mechanical Properties of ZrB2/h-BN Multiphase Ceramics by Low-Temperature Reactive Sintering

Effect of Hexagonal BN on the Microstructure and Mechanical Properties of Pressureless Sintered Porous Si3N4 Ceramics

Influence of hot-press sintering parameters on microstructures and mechanical properties of h-BN ceramics

Analysis of Mechanical Properties of Al2O3‐cBN‐hBN Composites and Identification of Main Influencing Factors

Physical and mechanical properties of hexagonal boron nitride ceramic fabricated by pressureless sintering without additive

Microstructure and mechanical properties of h-BN–SiC ceramic composites prepared by in situ combustion synthesis

Microstructure evolution and grain growth mechanisms of h-BN ceramics during hot-pressing

Influence of sintering pressure on the crystallization and mechanical properties of BN-MAS composite ceramics

Microstructural Evolution of H-BN Matrix Composite Ceramics With Amorphous La2O3-Al2O3-SiO2 Glass Phase During Hot Pressing

Microstructure and room/elevated-temperature mechanical properties of hot-pressed h-BN composite ceramics with La2O3-Al2O3-SiO2 addition

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

Microstructural Evolution of H-BN&amp;nbsp;Matrix Composite Ceramics With Amorphous La2O3-Al2O3-SiO2&amp;nbsp;Glass Phase During Hot Pressing

Effect of Infiltration-and Pyrolyzation-Treatment on Mechanical Properties of Pressureless Sintered SiC/h-BN Ceramics

Microstructural evolution of h-BN matrix composite ceramics with La-Al-Si-O glass phase during hot-pressed sintering

Effects of h-BN addition on microstructures and mechanical properties of β-CaSiO3 bioceramics

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

Fabrication and Properties of Pressureless Sintered Si3N4/BN Composite Ceramics with La2O3-Al2O3-Y2O3 as Sintering Additives

Microstructure and mechanical properties of AlN–hBN based machinable ceramics prepared by pressureless sintering

Effect Of H-Bn Content On The Sintering Properties Of Sic-Yag-Bn Multiphase Ceramics

Microstructural Evolution of H-BN Matrix Composite Ceramics With Amorphous La2O3-Al2O3-SiO2 Glass Phase During Hot Pressing