Abstract:Hexagonal boron nitride (h-BN) composite ceramics were prepared by hot pressing with the addition of Y2O3 and AlN. The effects of different Y2O3–AlN contents on microstructural evolution, mechanical properties and thermal diffusion coefficients of h-BN composite ceramics were investigated. The results indicate that Y2O3–AlN forms a liquid phase during the sintering process, achieving a good wettability with h-BN grains. In pure h-BN ceramic and h-BN composite ceramic with 40 wt% Y2O3–AlN, the h-BN grains grow well when controlled through solid-phase and liquid-phase diffusion, respectively. With the increase in Y2O3–AlN content, mechanical properties and thermal diffusion coefficients of h-BN composite ceramics first decrease and then increase, and the properties of h-BN composite ceramic with 10 wt% Y2O3–AlN are the inflection points. Such properties are highly related to the phase compositions, porosity and microstructure.<h3 class="a-plus-plus">Graphic abstract</h3>

Microstructure and room/elevated-temperature mechanical properties of hot-pressed h-BN composite ceramics with La2O3-Al2O3-SiO2 addition

Microstructural evolution of h-BN matrix composite ceramics with La-Al-Si-O glass phase during hot-pressed sintering

Microstructural Evolution of H-BN Matrix Composite Ceramics With Amorphous La2O3-Al2O3-SiO2 Glass Phase During Hot Pressing

Microstructural Evolution of H-BN&nbsp;Matrix Composite Ceramics With Amorphous La2O3-Al2O3-SiO2&nbsp;Glass Phase During Hot Pressing

Microstructural evolution and mechanical properties of h-BN composite ceramics with Y2O3–AlN addition by liquid-phase sintering

Microstructural Evolution and Mechanical Properties of H-Bn Composite Ceramics with Y 2 O 3 –aln Addition by Liquid-Phase Sintering

Fabrication of High Strength α-SiAlON/BN Composition Ceramics by Hot Pressing

Microstructure of hot-pressed h-BN/Si3N4 ceramic composites with Y2O3–Al2O3 sintering additive

Fabrication and Properties of Pressureless Sintered Si3N4/BN Composite Ceramics with La2O3-Al2O3-Y2O3 as Sintering Additives

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Cyclic thermal shock resistance of h-BN composite ceramics with La2O3–Al2O3–SiO2 addition

Cyclic thermal shock resistance of h-BN composite ceramics with La<sub>2</sub>O<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub>-SiO<sub>2</sub> addition

Mechanical and tribological properties of hot-pressed h-BN/Si3N4 ceramic composites

Fabrication and Properties of Pressureless Sintered Si<sub>3</sub>N<sub>4</sub>/BN Composite Ceramics with La<sub>2</sub>O<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub>-Y<sub>2</sub>O<sub>3</sub> as Sintering Additives

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

Fabrication and Properties of Pressureless Sintered Si<sub>3</sub>N<sub>4</sub>/BN Composite Ceramics with La<sub>2</sub>O<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub>-Y<sub>2</sub>O<sub>3</sub> as Sintering Additives

Mechanical and wear properties of h-BN/Si3N4 ceramic composites

Effect of Hexagonal BN on the Microstructure and Mechanical Properties of Pressureless Sintered Porous Si3N4 Ceramics

Effects of h-BN addition on microstructures and mechanical properties of β-CaSiO3 bioceramics

MICROSTRUCTURE, MECHANICAL PROPERTIES AND FRICTION/WEAR BEHAVIOR OF HOT-PRESSED Si₃N₄/ BN CERAMIC COMPOSITES

Microstructure and room/elevated-temperature mechanical properties of hot-pressed h-BN composite ceramics with La2O3-Al2O3-SiO2 addition

Microstructural evolution of h-BN matrix composite ceramics with La-Al-Si-O glass phase during hot-pressed sintering

Microstructural Evolution of H-BN Matrix Composite Ceramics With Amorphous La2O3-Al2O3-SiO2 Glass Phase During Hot Pressing

Microstructural Evolution of H-BN&amp;nbsp;Matrix Composite Ceramics With Amorphous La2O3-Al2O3-SiO2&amp;nbsp;Glass Phase During Hot Pressing

Microstructural evolution and mechanical properties of h-BN composite ceramics with Y2O3–AlN addition by liquid-phase sintering

Microstructural Evolution and Mechanical Properties of H-Bn Composite Ceramics with Y 2 O 3 –aln Addition by Liquid-Phase Sintering

Fabrication of High Strength α-SiAlON/BN Composition Ceramics by Hot Pressing

Microstructure of hot-pressed h-BN/Si3N4 ceramic composites with Y2O3–Al2O3 sintering additive

Fabrication and Properties of Pressureless Sintered Si3N4/BN Composite Ceramics with La2O3-Al2O3-Y2O3 as Sintering Additives

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Cyclic thermal shock resistance of h-BN composite ceramics with La2O3–Al2O3–SiO2 addition

Cyclic thermal shock resistance of h-BN composite ceramics with La<sub>2</sub>O<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub>-SiO<sub>2</sub> addition

Mechanical and tribological properties of hot-pressed h-BN/Si3N4 ceramic composites

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

Fabrication and Properties of Pressureless Sintered Si<sub>3</sub>N<sub>4</sub>/BN Composite Ceramics with La<sub>2</sub>O<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub>-Y<sub>2</sub>O<sub>3</sub> as Sintering Additives

Mechanical and wear properties of h-BN/Si3N4 ceramic composites

Effect of Hexagonal BN on the Microstructure and Mechanical Properties of Pressureless Sintered Porous Si3N4 Ceramics

Effects of h-BN addition on microstructures and mechanical properties of β-CaSiO3 bioceramics

MICROSTRUCTURE, MECHANICAL PROPERTIES AND FRICTION/WEAR BEHAVIOR OF HOT-PRESSED Si₃N₄/ BN CERAMIC COMPOSITES

Microstructural Evolution of H-BN Matrix Composite Ceramics With Amorphous La2O3-Al2O3-SiO2 Glass Phase During Hot Pressing