Abstract:Hexagonal boron nitride (h-BN) composite ceramics were prepared by hot pressing with the addition of Y2O3 and AlN. The effects of different Y2O3–AlN contents on microstructural evolution, mechanical properties and thermal diffusion coefficients of h-BN composite ceramics were investigated. The results indicate that Y2O3–AlN forms a liquid phase during the sintering process, achieving a good wettability with h-BN grains. In pure h-BN ceramic and h-BN composite ceramic with 40 wt% Y2O3–AlN, the h-BN grains grow well when controlled through solid-phase and liquid-phase diffusion, respectively. With the increase in Y2O3–AlN content, mechanical properties and thermal diffusion coefficients of h-BN composite ceramics first decrease and then increase, and the properties of h-BN composite ceramic with 10 wt% Y2O3–AlN are the inflection points. Such properties are highly related to the phase compositions, porosity and microstructure.<h3 class="a-plus-plus">Graphic abstract</h3>

Microstructural evolution of h-BN matrix composite ceramics with La-Al-Si-O glass phase during hot-pressed sintering

Microstructural Evolution of H-BN Matrix Composite Ceramics With Amorphous La2O3-Al2O3-SiO2 Glass Phase During Hot Pressing

Microstructural Evolution of H-BN&nbsp;Matrix Composite Ceramics With Amorphous La2O3-Al2O3-SiO2&nbsp;Glass Phase During Hot Pressing

Microstructure and room/elevated-temperature mechanical properties of hot-pressed h-BN composite ceramics with La2O3-Al2O3-SiO2 addition

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

Microstructural Evolution and Mechanical Properties of H-Bn Composite Ceramics with Y 2 O 3 –aln Addition by Liquid-Phase Sintering

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

Microstructural evolution and mechanical properties of h-BN composite ceramics with Y2O3–AlN addition by liquid-phase sintering

Microstructure of hot-pressed h-BN/Si3N4 ceramic composites with Y2O3–Al2O3 sintering additive

Fabrication of High Strength α-SiAlON/BN Composition Ceramics by Hot Pressing

Analysis of Mechanical Properties of Al2O3‐cBN‐hBN Composites and Identification of Main Influencing Factors

Effect of Hexagonal BN on the Microstructure and Mechanical Properties of Pressureless Sintered Porous Si3N4 Ceramics

Influence of hot-press sintering parameters on microstructures and mechanical properties of h-BN ceramics

Influence of sintering temperature on the crystallization and mechanical properties of BN‐MAS composites

Microstructures and Mechanical Properties of SiBCNAl Ceramics Produced by Mechanical Alloying and Subsequent Hot Pressing

Effects of AlN Content on Phase Composition, Microstructure and Mechanical Properties of BN-based Composite Ceramics

Mechanical and tribological properties of hot-pressed h-BN/Si3N4 ceramic composites

Effects of sintering temperature on the microstructure and properties of <i>h</i>-BN ceramics with MAS as liquid sintering aid

Fabrication and Properties of Pressureless Sintered Si3N4/BN Composite Ceramics with La2O3-Al2O3-Y2O3 as Sintering Additives