Abstract:Based on the classical Monte Carlo (MC) model and grain growth theory, the model of h-BN@Al2O3 coated solid lubricant was designed and introduced into the simulation system. The Al2O3/TiB2/h-BN@Al2O3 self-lubricating composite ceramic tool model was designed, and the microstructure evolution of tool materials during hot pressing sintering was simulated. The effects of TiB2 and h-BN@Al2O3 content on the microstructure of ceramic materials were studied, and finally the optimized composition parameters were obtained. The effects of sintering temperature and sintering pressure on the microstructure of tool materials were studied, and reasonable sintering parameters were obtained. The experimental results show that under the sintering temperature of 1650℃ and sintering pressure of 32Mpa, the ceramic material with 10%volTiB2 and 5%volh-BN@Al2O3 has the best mechanical properties, that is, the bending strength is 610MPa, the hardness is 17.9GPa, and the fracture toughness is 5.17 MPa·m1/2. SEM analysis shows that the grain growth of the material is uniform, the solid lubricant is well combined with the matrix, and the material has a good microstructure. Comparing the simulation results with the previous experimental results, it is found that the results are in good agreement, which indicates that the designed MC model reliably reflects the physical process of material grain growth, and has certain guiding significance for further research on the mechanism of grain growth.

Analysis of Mechanical Properties of Al2O3‐cBN‐hBN Composites and Identification of Main Influencing Factors

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

High-Pressure synthesis of Al2O3-cBN-hBN Self-lubricating ceramic

High-pressure Synthesis of Tungsten Carbide–cubic Boron Nitride (wc–cbn) Composites: Effect of Cbn Particle Size and Volume Fraction on Their Microstructure and Properties

High-pressure synthesis and performance analysis of WC-cBN-MoS2 self-lubricating ceramic composites

Microstructure and mechanical properties of AlN–hBN based machinable ceramics prepared by pressureless sintering

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

High Pressure Synthesis of Tungsten Carbide–Cubic Boron Nitride (WC–cBN) Composites: Effect of Thermodynamic Condition and cBN Volume Fraction on their Microstructure and Properties

Mechanical and tribological properties of h-BN/ZrO2/SiC solid-lubricating ceramic composites

Mechanical and tribological properties of hot-pressed h-BN/Si3N4 ceramic composites

Machinability, deformation, and cracks behavior of pressureless-sintered Al2O3/h-BN composites: role of weak boundary phases

Synthesis and characterization of cubic boron nitride (Al)-Al2O3 composites under high pressure and high temperature conditions

Hard and tough ultrafine-grained B4C-cBN composites prepared by high-pressure sintering

Effect of hBN Content on the Friction and Wear Characteristics of Al2O3-B2O3-CaO-hBN Ceramic Composites under Dry Sliding Condition

Influence of hBN content on mechanical and tribological properties of Si3N4/BN ceramic composites

In situ synthesis of PcBN composites by Sialon combined with cBN-TiB2-AlN and their properties

Microstructural evolution of h-BN matrix composite ceramics with La-Al-Si-O glass phase during hot-pressed sintering

Microstructure and performance optimization of Al2O3/TiC/TiB2/h-BN@Al2O3 self-lubricating ceramic tool materials

The Study on the Property and the Microstructure of Pressureless Sintered h-BN Ceramics