Abstract:Cubic boron nitride (cBN) with high hardness, thermal conductivity, wear resistance, and chemical inertness has become the most promising abrasive and machining material. Due to the difficulty of fabricating pure cBN body, generally, some binders are incorporated among cBN particles to prepare polycrystalline cubic boron nitride (PcBN). Hence, the binders play a critical factor to the performances of PcBN composites. In this study, the PcBN composites with three binder systems containing ceramic and metal phases were fabricated by spark plasma sintering (SPS) from 1400 to 1700 °C. The sintering behaviors and mechanical properties of the composites were investigated. Results show that the effect of binder formulas on mechanical properties mainly related to the compactness, mechanical performances, and thermal expansion coefficient of binder phases, which affect the carrying capacity of the composites and the bonding strength between binder phases and cBN particles. The PcBN composite with SiAlON phase as binder presented optimal flexural strength (465±29 MPa) and fracture toughness (5.62±0.37 MPa·m 1/2 ), attributing to the synergistic effect similar to transgranular and intergranular fractures. Meanwhile, the excellent mechanical properties can be maintained a comparable level when the temperature even rises to 800 °C. Due to the weak bonding strength and high porosity, the PcBN composites with Al 2 O 3 -ZrO 2 (3Y) and Al-Ti binder systems exhibited inferior mechanical properties. The possible mechanisms to explain these results were also analyzed.

In situ synthesis of PcBN composites by Sialon combined with cBN-TiB2-AlN and their properties

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

High-pressure Synthesis of Tungsten Carbide–cubic Boron Nitride (wc–cbn) Composites: Effect of Cbn Particle Size and Volume Fraction on Their Microstructure and Properties

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

High Pressure and High Temperature Sintered PcBN Using Al, B4C and C as Sintering Additive

Influence of binder systems on sintering characteristics, microstructures, and mechanical properties of PcBN composites fabricated by SPS

Effect of Al Ti content on mechanical properties of in-situ synthesized PcBN composites

Preparation of superhard cubic boron nitride sintered from commercially available submicron powders

Effect of hBN addition on the fabrication, mechanical and tribological properties of Sialon materials

Sialon-Boron Nitride Porous Composites: in Situ Synthesis, Microstructure and Properties

Preparation And Characterization Of Polycrystalline Cubic Boron Nitride (Pcbn) Compacts By A Pressureless Sintering Process

Fabrication and properties of AL2O3-SiAlON composites with nano-sized t- and h-BN dispersion

Influence of Sintering Temperature on Structure and Mechanical Properties of Polycrystalline Cubic Boron Nitride Composites

Synthesis of cBN-hBN-SiCw Nanocomposite with Superior Hardness, Strength, and Toughness

Analysis of Mechanical Properties of Al2O3‐cBN‐hBN Composites and Identification of Main Influencing Factors

Phase composition, microstructure, and mechanical properties of PcBN composites with Ti and Ti Al binders: Effects of holding time and synthesis pressure

Synthesis and Characterization of Novel Ti3SiC2–cBN Composites

Fabrication and Properties of SiO2-BN-Si3N4 Composites

Densification and mechanical properties of boron carbide prepared via spark plasma sintering with cubic boron nitride as an additive

Fabrication and Properties of Machinable SiC/h-BN Nano-composites

A Novel In Situ Synthesis Of Sibcn-Zr Composites Prepared By A Sol-Gel Process And Spark Plasma Sintering