Abstract:Hexagonal boron nitride (hBN) exhibits high thermal conductivity within the in-plane direction and significantly lower thermal conductivity in the cross-plane direction because of its anisotropic nature. When the texture properties of bulk hBN are strong, it is a potentially promising application area for the insulating heat spreaders and heat sinks. In this study, hBN was synthesized in situ with the spark plasma sintering (SPS) technique and the effects of sintering temperature on the orientation of hBN grains were investigated. The precursor was prepared by chemically reacting urea and boric acid in heat treatment at 850 °C. The hBN was produced using the previous precursor in a SPS at 1500, 1700, and 1900 °C. The samples were characterized using XRD, FTIR, SEM and Raman spectroscopy. The properties of the samples were further determined through measurements of density, DSC and thermal diffusivity. The hBN samples obtained through the SPS process have nano and micron-size grains. The hBN was highly crystalline and homogeneous, as determined by the XRD pattern, Raman spectra and Raman maps. The orientation of hBN grains has been revealed in the c-axis of hBN crystallites and was preferably arranged within a plane parallel to the SPS pressing direction. The hBN orientation preference index (IOP) value of −19925.5 at 1700 °C indicates the highest quality texture orientation. Increasing the temperature to 1900 °C decreased the orientation in the direction parallel to the pressing direction. The highest thermal conductivity calculated according to the thermal diffusivity perpendicular to the sintering pressure direction was 8.86 W m −1 K −1 at 1900 °C.

Microstructure and dielectric properties of hexagonal boron nitride prepared by hot pressing (uniaxial and isostatic) and by spark plasma sintering

The Study on the Property and the Microstructure of Pressureless Sintered h-BN Ceramics

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

Anomalous properties of spark plasma sintered boron nitride solids

Microstructural evolution of h-BN matrix composite ceramics with La-Al-Si-O glass phase during hot-pressed sintering

The Effect of SiC Content on Microstructure and Microwave Heating Rate of h-BN/SiC Ceramics Fabricated by Spark Plasma Sintering

Microstructure and room/elevated-temperature mechanical properties of hot-pressed h-BN composite ceramics with La2O3-Al2O3-SiO2 addition

Microstructure and Mechanical Properties of ZrB2/h-BN Multiphase Ceramics by Low-Temperature Reactive Sintering

Effect of sintering pressure on the texture of hot-press sintered hexagonal boron nitride composite ceramics

Microstructure evolution and grain growth mechanisms of h-BN ceramics during hot-pressing

The investigation of synthesis and textured properties of in situ formed hBN with spark plasma sintering

Influence of hot-press sintering parameters on microstructures and mechanical properties of h-BN ceramics

Spark Plasma Sintering and Characterization of Mixed H-Bn Powders with Different Grain Sizes

Preparation And Characterization Of Polycrystalline Cubic Boron Nitride (Pcbn) Compacts By A Pressureless Sintering Process

Preparation and Properties of BN-SiO<sub>2</sub> Composite Ceramics

Physical and mechanical properties of hexagonal boron nitride ceramic fabricated by pressureless sintering without additive

Effect of hexagonal boron nitride content on the anisotropy of hot-press-sintered AlN/BN composite ceramics

Anisotropies in structure and properties of hot-press sintered h-BN-MAS composite ceramics: Effects of raw h-BN particle size

Mechanical, dielectric and thermal properties of porous boron nitride/silicon oxynitride ceramic composites prepared by pressureless sintering