Abstract:When HVDC system operates in monopolar mode and uses the earth as a return path,the electrode current with the magnitude of several kiloamperes can cause significant potential difference between different locations.Meanwhile,there may be direct currents flowing through the power transformers with neutral points grounded,which results in a series of harmful consequences.Under heavy saturation due to DC bias,lots of magnetic flux will be pushed out of the iron core and pass through leakage paths consisting of insulation media and metal parts.Taking the example of a simplified power system with a 105 MVA/220 kV three-phase three-limb transformer,some simulation results regarding the estimation of Manapouri transformer performance for no load case when HVDC earth return current is presented.Instead of using either a branch impedance or an admittance matrix to represent the iron core of transformer,the coupled electromagnetic method based on the core topology is adopted and a three-phase three-limb transformer model has been established.It can represent transformer characteristics very accurately with properly decided parameters.In this model, the loop equations which relate the loop flux to the externally applied magnetomotive forces with reluctances as coefficients are obtained.The effects of transformer leakage paths are modelled by constant magnetic reluctances and discussed in detail.The results with different magnitudes of these leakage reluctances show that the characteristics of leakage paths would influence the immunity of three-phase three-limb transformer from DC biasing current.Since such type of transformer will also be affected by DC biasing current when the reluctances of leakage paths are not large enough,the leakage paths should be considered carefully during the design and manufacture of power transformer.

Analysis and Countermeasure Study on DC Bias of Main Transformer in a City

Analysis and Optimized Suppression of DC Bias in Large AC Power Grid

A Review of Research on Transformer DC Bias Caused by HVDC Transmission

Mitigation Strategy of Neutral-Point DC for Transformer Caused by Metro Stray Currents

A Comprehensive Coupled Methodology for Calculation and Suppression of DC Bias in UHVDC Transmission Systems

Research Progress on Suppression Measures of Transformer DC Bias

Field Monitoring and Analysis on Vibration and Noise of 500 Kv Electrical Transformer under DC Current Biasing

Analysis and Simulation of Transformer DC Bias and Measures of Suppression in Hami Region

Train-earth-grid coupling DC magnetic bias model for stray current diffusion

Effects on Transformer due to UHVDC Mono-polar Operation and Calculation of Ground Electrode Current

Effects of Transformer DC Bias and the Relationship Between UHVDC Grounding Current and Grounding Resistances

Research on the Withstand Performance of Three-phase Three-limb Power Transformer under DC Current Biasing

Research on DC Magnetic Biasing Characteristic of Converter Transformer for AC/DC Corridor-Sharing Power Transmission System

Characteristic Extraction and Assessment Methods for Transformers DC Bias Caused by Metro Stray Currents

ELECTROMAGNETIC AND THERMAL CHARACTERISTICS SIMULATION FOR THREE-PHASE THREE-LIMB TRANSFORMERS UNDER DC MAGNETIC BIAS

Experimental Study On Dc Biasing Impact On Transformer'S Vibration And Sound

Analysis of Noise Characteristics and DC Bias of Major Equipment in Urban Substation

Analysis on Overvoltage in Renovated Control and Protection System for HVDC Power Transmission Project from Tianshengqiao to Guangzhou

Effect of DC Bias Current on Group-Type Transformer and Its Restraining Measures

Relationship Analysis Between Metro Rail Potential and Neutral Direct Current of Nearby Transformers

Magnetic Flux Bias Compensation Based on Voltage Injection Method With an Auxiliary DC/DC Converter