Abstract:When HVDC system operates in monopolar mode and uses the earth as a return path,the electrode current with the magnitude of several kiloamperes can cause significant potential difference between different locations.Meanwhile,there may be direct currents flowing through the power transformers with neutral points grounded,which results in a series of harmful consequences.Under heavy saturation due to DC bias,lots of magnetic flux will be pushed out of the iron core and pass through leakage paths consisting of insulation media and metal parts.Taking the example of a simplified power system with a 105 MVA/220 kV three-phase three-limb transformer,some simulation results regarding the estimation of Manapouri transformer performance for no load case when HVDC earth return current is presented.Instead of using either a branch impedance or an admittance matrix to represent the iron core of transformer,the coupled electromagnetic method based on the core topology is adopted and a three-phase three-limb transformer model has been established.It can represent transformer characteristics very accurately with properly decided parameters.In this model, the loop equations which relate the loop flux to the externally applied magnetomotive forces with reluctances as coefficients are obtained.The effects of transformer leakage paths are modelled by constant magnetic reluctances and discussed in detail.The results with different magnitudes of these leakage reluctances show that the characteristics of leakage paths would influence the immunity of three-phase three-limb transformer from DC biasing current.Since such type of transformer will also be affected by DC biasing current when the reluctances of leakage paths are not large enough,the leakage paths should be considered carefully during the design and manufacture of power transformer.

Vibration characteristic analysis of transformers influenced by DC bias based on vibration half-wave energy method

Research on Vibration Saltation of the Transformer Core Caused by DC Bias of Based on Empirical Mode Decomposition

Analysis Of Transformer'S Winding Vibration Characteristics Using Hilbert-Huang Transform

Research on power transformer vibration and noise under DC bias condition

A magnetic-mechanical strong coupling FEM model and vibration characteristic analysis of transformer core under DC bias

Experimental Study On Dc Biasing Impact On Transformer'S Vibration And Sound

Field Monitoring and Analysis on Vibration and Noise of 500 Kv Electrical Transformer under DC Current Biasing

Electromagnetic Vibration Characteristics of High-Frequency Transformer under DC Bias with Different Winding Structures

Vibration and Audible Noise Characteristics of AC Transformer Caused by HVDC System under Monopole Operation

Magnetic Flux Bias Compensation Based on Voltage Injection Method With an Auxiliary DC/DC Converter

The No-Load Performance of 3-Phase Transformer Bank under Direct-Current Bias Based on the 3d Transient Analysis

Research on Testing of Over-exciting to Evaluate the Tolerated DC Currents of Transformers

A Comprehensive Coupled Methodology for Calculation and Suppression of DC Bias in UHVDC Transmission Systems

Research on Short-Circuit Vibration of Power Transformer

Analysis and Optimized Suppression of DC Bias in Large AC Power Grid

Calculation Method of Winding Eddy-Current Losses for High-Voltage Direct Current Converter Transformers

Characteristic Extraction and Assessment Methods for Transformers DC Bias Caused by Metro Stray Currents

An Analog-based, Duty Cycle Modulation Method to Remove the DC Bias in the Transformer for a Dual Active Bridge Converter

Iron Loss and Temperature Rise Analysis of a Transformer Core Considering Vector Magnetic Hysteresis Characteristics under Direct Current Bias

Research on the Withstand Performance of Three-phase Three-limb Power Transformer under DC Current Biasing

Validity Evaluation Method Based on Data Driving for On-Line Monitoring Data of Transformer under DC-Bias