Abstract:When HVDC system operates in monopolar mode and uses the earth as a return path,the electrode current with the magnitude of several kiloamperes can cause significant potential difference between different locations.Meanwhile,there may be direct currents flowing through the power transformers with neutral points grounded,which results in a series of harmful consequences.Under heavy saturation due to DC bias,lots of magnetic flux will be pushed out of the iron core and pass through leakage paths consisting of insulation media and metal parts.Taking the example of a simplified power system with a 105 MVA/220 kV three-phase three-limb transformer,some simulation results regarding the estimation of Manapouri transformer performance for no load case when HVDC earth return current is presented.Instead of using either a branch impedance or an admittance matrix to represent the iron core of transformer,the coupled electromagnetic method based on the core topology is adopted and a three-phase three-limb transformer model has been established.It can represent transformer characteristics very accurately with properly decided parameters.In this model, the loop equations which relate the loop flux to the externally applied magnetomotive forces with reluctances as coefficients are obtained.The effects of transformer leakage paths are modelled by constant magnetic reluctances and discussed in detail.The results with different magnitudes of these leakage reluctances show that the characteristics of leakage paths would influence the immunity of three-phase three-limb transformer from DC biasing current.Since such type of transformer will also be affected by DC biasing current when the reluctances of leakage paths are not large enough,the leakage paths should be considered carefully during the design and manufacture of power transformer.

The No-Load Performance of 3-Phase Transformer Bank under Direct-Current Bias Based on the 3d Transient Analysis

3-D Nonlinear Transient Eddy Current Calculation of Online Power Transformer under DC Bias

Research on the Withstand Performance of Three-phase Three-limb Power Transformer under DC Current Biasing

Analysis and Optimized Suppression of DC Bias in Large AC Power Grid

Experiments and simulation analysis of 500kV single-phase three-column transformer in No-load under DC bias

A Direct Method Based on Incidence Matrix for Unbalanced Three-phase Distributed Network

Research on Testing of Over-exciting to Evaluate the Tolerated DC Currents of Transformers

Iron Loss and Temperature Rise Analysis of a Transformer Core Considering Vector Magnetic Hysteresis Characteristics under Direct Current Bias

Research on power transformer vibration and noise under DC bias condition

A Comprehensive Coupled Methodology for Calculation and Suppression of DC Bias in UHVDC Transmission Systems

Improved Power Transformer Model for DC Biasing Analysis Considering Transient Leakage Reluctances

Analysis Of Dc-Link Current Of Parallel Three-Phase Inverters Under Unbalanced Output Currents

Study Of The Three-Phase Saturated Transformer Coupling New Bridge-Type Ssfcl

Train-earth-grid coupling DC magnetic bias model for stray current diffusion

Characteristic Extraction and Assessment Methods for Transformers DC Bias Caused by Metro Stray Currents

Analysis of Unbalance of Three-phase Leak Current in DC Dielectric Test of 1 000 MW Generator Stator in Nuclear Power Plant

Magnetic Flux Bias Compensation Based on Voltage Injection Method With an Auxiliary DC/DC Converter

Analysis of Magnetic Performance and Magnetostrictive Properties of Grain-Oriented Electrical Steels under DC Bias Condition

Calculation Of Eddy Current Field In The Ascending Flange For The Bushings And Tank Wall Of A Large Power Transformer

Negative Sequence Eddy Current Field Analysis of a 1055 MVA Turbogenerator by Using 3D Finite Element Methods

Experimental Study On Dc Biasing Impact On Transformer'S Vibration And Sound