Abstract:When HVDC system operates in monopolar mode and uses the earth as a return path,the electrode current with the magnitude of several kiloamperes can cause significant potential difference between different locations.Meanwhile,there may be direct currents flowing through the power transformers with neutral points grounded,which results in a series of harmful consequences.Under heavy saturation due to DC bias,lots of magnetic flux will be pushed out of the iron core and pass through leakage paths consisting of insulation media and metal parts.Taking the example of a simplified power system with a 105 MVA/220 kV three-phase three-limb transformer,some simulation results regarding the estimation of Manapouri transformer performance for no load case when HVDC earth return current is presented.Instead of using either a branch impedance or an admittance matrix to represent the iron core of transformer,the coupled electromagnetic method based on the core topology is adopted and a three-phase three-limb transformer model has been established.It can represent transformer characteristics very accurately with properly decided parameters.In this model, the loop equations which relate the loop flux to the externally applied magnetomotive forces with reluctances as coefficients are obtained.The effects of transformer leakage paths are modelled by constant magnetic reluctances and discussed in detail.The results with different magnitudes of these leakage reluctances show that the characteristics of leakage paths would influence the immunity of three-phase three-limb transformer from DC biasing current.Since such type of transformer will also be affected by DC biasing current when the reluctances of leakage paths are not large enough,the leakage paths should be considered carefully during the design and manufacture of power transformer.

3-D Nonlinear Transient Eddy Current Calculation of Online Power Transformer under DC Bias

The No-Load Performance of 3-Phase Transformer Bank under Direct-Current Bias Based on the 3d Transient Analysis

On-line Measurement for Power Angle and Circuit Parameter in the Turbo Steam Generator with the FEM Based

Calculation Method of Winding Eddy-Current Losses for High-Voltage Direct Current Converter Transformers

3-D Eddy Current Analysis in the End Region of a Turbogenerator by Using Reduced Magnetic Vector Potential

Utilizing Design Sensitivity Analysis for 3D Optimization of Transformer Tank Shields Considering Eddy Currents

Analysis and Optimized Suppression of DC Bias in Large AC Power Grid

Calculation Of Eddy Current Field In The Ascending Flange For The Bushings And Tank Wall Of A Large Power Transformer

Negative Sequence Eddy Current Field Analysis of a 1055 MVA Turbogenerator by Using 3D Finite Element Methods

ANALYSIS OF ELECTROMAGNETIC FIELDS AND EDDY CURRENT LOSSES IN LARGE POWER TRANSFORMERS

3D Eddy Current and Temperature Field Analysis of Large Hydro-Generators in Leading Phase Operations

Improved Power Transformer Model for DC Biasing Analysis Considering Transient Leakage Reluctances

New Iterative Method for Three-Dimensional Eddy-Current Problems

Dynamic Electromagnetic Force Analysis of a Power Transformer with Regulated Windings

An Improved Time Period FEM for Numerical Analysis of Electromagnetic Fields of Power Transformers under DC Bias

Full 3D eddy current and temperature field analysis of large hydro-generators in different operating conditions

Research on the Withstand Performance of Three-phase Three-limb Power Transformer under DC Current Biasing

3D finite element study of transient electromagnetic forces acting on the stator end-windings of a large turbo-generator

Iron Core Nonlinearities of Power Transformer

A Coupled FEM-BEM Methodology to Calculate 3D Earth Surface Potentials Caused by HVDC Return Currents

A Comprehensive Coupled Methodology for Calculation and Suppression of DC Bias in UHVDC Transmission Systems