Abstract:Power transformers represent an important part of the capital investment in transmission and distribution substations. The cooling of the windings (electrical coil) depends on the convection of heat, enhanced by the forced circulation of oil through the windings and heat exchangers. The forced circulation of oil combined with the forced circulation of air in the heat exchangers is usually found in mobile transformers, whose compact structure is a challenge in terms of heat transfer rates. An improper design or fabrication problem associated with the assembling of the cooling system may result in an inefficient exchange of heat, which may lead to transformer failure from overheating or a reduction of the life span. In this context, the present work proposes a 2D mathematical model to simulate the winding cooling system of a 138 × 69–34 × 13.8 kV 25 MVA Mobile Power Transformer with the objective of investigating the causes of overheating. The model is implemented in CFD Ansys-Fluent® version 17.0 and validated with experimental data. It is evaluated the velocity and temperature distribution, and the identification of the hot spots on the transformer operating considering the nominal conditions for oil flow rate, inlet temperature, and power dissipated. The hot spot temperatures are compared with the current Brazilian Association of Technical Standards—NBR 5356-2: 2007 Power Transformers Part 2: Heating. After, some geometric and/or operational constraints are artificially imposed on the transformer. Their impact on the velocity and temperature fields, as well as the hot spot temperatures, are mapped in order to verify if they still respect the standard ́s temperature limits and if imposed constraints may lead to the transformer failure. The numerical results clearly illustrate that geometric imperfections in the disks, guides, or axial cooling ducts have a direct impact on oil flow and temperature distributions. These imperfections can also alter the positioning and significantly increase the temperature of the hottest spot within the winding, sometimes even exceeding the requirements of the ABNT NBR 5356:2 standard in certain scenarios. Therefore, the proposed mathematical model serves as a valuable tool for investigating a complex and common issue within the energy distribution system. This issue not only inconveniences the population but also leads to economic challenges each year. Finally, the outcomes of this study can provide engineers with essential insights to enhance the thermal design of power transformers, as well it can assist in guiding maintenance efforts and understanding the root causes of new failures.

ANALYSIS OF ELECTROMAGNETIC FIELDS AND EDDY CURRENT LOSSES IN LARGE POWER TRANSFORMERS

Calculation Method of Winding Eddy-Current Losses for High-Voltage Direct Current Converter Transformers

Evaluation of the Calculation Method for Stray Losses in Structural Parts of HVDC Converter Transformers

Calculation Of Eddy Current Field In The Ascending Flange For The Bushings And Tank Wall Of A Large Power Transformer

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Dynamic Electromagnetic Force Analysis of a Power Transformer with Regulated Windings

3-D Eddy Current Analysis in the End Region of a Turbogenerator by Using Reduced Magnetic Vector Potential

Semi-analytical and Data-Driven Models of Electric Field Strength Considering the Actual Structure of Medium Frequency Transformers

Magnetic-Thermal-Flow Field Coupling Simulation of Oil-Immersed Transformer

Calculation and Analysis of Heat Field of Large Capacity Epoxy Pouring Dry-type Transformer Based on Fluid-solid Coupling

Electromagnetic Field Analysis and Optimization Method of High-Temperature Superconducting Transformer under the Influence of Abnormal Voltage

Analysis of Fine Fault Electrothermal Characteristics of Converter Transformer Reduced-Scale Model

Numerical evaluation of the directed oil cooling system of a mobile power transformer

Iron Loss and Temperature Rise Analysis of a Transformer Core Considering Vector Magnetic Hysteresis Characteristics under Direct Current Bias

Evaluating the Harmonic Effects on the Thermal Performance of a Power Transformer

Calculation And Control Of Stray Losses In Power Transformer

Research on temperature distribution characteristics of oil‐immersed power transformers based on fluid network decoupling

High-Precision Simulation For Structure And Efficiency Optimization Of High-Power High-Frequency Transformer

Comprehensive Power Losses Model for Electronic Power Transformer

Thermal field modeling and characteristic analysis based on oil immersed transformer

Magneto-thermal coupling simulation and experimental verification for a three-winding high-frequency transformer