Abstract:When HVDC system operates in monopolar mode and uses the earth as a return path,the electrode current with the magnitude of several kiloamperes can cause significant potential difference between different locations.Meanwhile,there may be direct currents flowing through the power transformers with neutral points grounded,which results in a series of harmful consequences.Under heavy saturation due to DC bias,lots of magnetic flux will be pushed out of the iron core and pass through leakage paths consisting of insulation media and metal parts.Taking the example of a simplified power system with a 105 MVA/220 kV three-phase three-limb transformer,some simulation results regarding the estimation of Manapouri transformer performance for no load case when HVDC earth return current is presented.Instead of using either a branch impedance or an admittance matrix to represent the iron core of transformer,the coupled electromagnetic method based on the core topology is adopted and a three-phase three-limb transformer model has been established.It can represent transformer characteristics very accurately with properly decided parameters.In this model, the loop equations which relate the loop flux to the externally applied magnetomotive forces with reluctances as coefficients are obtained.The effects of transformer leakage paths are modelled by constant magnetic reluctances and discussed in detail.The results with different magnitudes of these leakage reluctances show that the characteristics of leakage paths would influence the immunity of three-phase three-limb transformer from DC biasing current.Since such type of transformer will also be affected by DC biasing current when the reluctances of leakage paths are not large enough,the leakage paths should be considered carefully during the design and manufacture of power transformer.

Improved Power Transformer Model for DC Biasing Analysis Considering Transient Leakage Reluctances

3-D Nonlinear Transient Eddy Current Calculation of Online Power Transformer under DC Bias

Analysis and Optimized Suppression of DC Bias in Large AC Power Grid

An Improved Time Period FEM for Numerical Analysis of Electromagnetic Fields of Power Transformers under DC Bias

The No-Load Performance of 3-Phase Transformer Bank under Direct-Current Bias Based on the 3d Transient Analysis

Research on the Withstand Performance of Three-phase Three-limb Power Transformer under DC Current Biasing

Simulation and Experiment Research on the Effects of DC-Bias Current on the 500kV Power Transformer

Simulation of Losses in Dc-Biased Single Phase Three Limb Transformer

Calculation of DC Bias Reactive Power Loss of Converter Transformer via Finite Element Analysis

ELECTROMAGNETIC AND THERMAL CHARACTERISTICS SIMULATION FOR THREE-PHASE THREE-LIMB TRANSFORMERS UNDER DC MAGNETIC BIAS

3D FEM Simulation Study of a Single-Phase Three-Limb Transformer under DC Bias

Simulation and Experimental Analysis of Single-phase Transformers under DC Bias

Dynamic Hysteresis Loss Model of Power Transformer under DC Current Biasing and Its Verification

A comparative study of J–A and Preisach improved models for core loss calculation under DC bias

Research on DC Magnetic Biasing Characteristic of Converter Transformer for AC/DC Corridor-Sharing Power Transmission System

Improved Secant Method for Getting Proper Initial Magnetization in Transformer DC Bias Simulation

Grey Relational Analysis of Model ParametersˊImpact on DC Bias Simulation Result of Transformer

Transient DC Bias and Current Impact Effects of High-Frequency-Isolated Bidirectional DC–DC Converter in Practice

Analysis of Excitation Characteristics of Transformers with Different Core Shapes under Severe DC Bias

Iron Loss and Temperature Rise Analysis of a Transformer Core Considering Vector Magnetic Hysteresis Characteristics under Direct Current Bias

Electromagnetic Hybrid Model for Three-phase Three-leg Transformer DC Bias Based on Jiles-Atherton Hysteresis Theory