Abstract:Magnetic eddy current losses is significant in permanent magnet motors, especially in high-power density permanent magnet motors. It significantly affects the magnet’s temperature and properties and may cause irreversible demagnetization. Several methods for reducing magnetic eddy current losses is proposed to address these problems. First, a field-circuit coupled mathematical model was established to calculate the magnetic eddy current losses. Experiments on the phase current and magnetic eddy current losses verify the accuracy of field-circuit coupled mathematical model. Then based on the model, the effect of the trigger angle, slot opening width, pole arc coefficient, pole arc center offset, and auxiliary slots on the magnetic eddy current losses were assessed. The results showed that the magnetic eddy current loss could be reduced by choosing a suitable leading trigger angle, pole arc coefficient, and pole arc center offset. A smaller slot opening width reduced the eddy current losses. A novel auxiliary slot with an optimized size is proposed to reduce eddy current losses. Finally, taking the trigger angle, slot opening width, pole arc coefficient, pole arc center offset and the auxiliary groove as the optimization factors and the magnetic eddy current loss as the optimization target, the optimal parameter scheme is obtained by Taguchi method. The simulation results show that the optimized magnetic eddy current losses is reduced by 8.57%.

Dynamic Hysteresis Loss Model of Power Transformer under DC Current Biasing and Its Verification

Iron Loss and Temperature Rise Analysis of a Transformer Core Considering Vector Magnetic Hysteresis Characteristics under Direct Current Bias

A comparative study of J–A and Preisach improved models for core loss calculation under DC bias

A modified jiles-atherton model for estimating the iron loss of electrical steel considering DC bias

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Calculation Method of Winding Eddy-Current Losses for High-Voltage Direct Current Converter Transformers

Iron Loss Model Under DC Bias Flux Density Considering Temperature Influence

A Dynamic Hysteresis Model for Loss Estimation of GO Silicon Steel Under DC-Biased Magnetization

Prediction of Core Loss in Transformer Laminated Core under DC Bias Based on Generalized Preisach Model

Electromagnetic Hybrid Model for Three-phase Three-leg Transformer DC Bias Based on Jiles-Atherton Hysteresis Theory

Loss Calculation of Iron Core under DC Bias and Harmonic Disturbance Conditions

A Novel Estimation Model for Hysteresis Loss Based on Semi-Minor Loops

Generalized Dynamic Hysteresis Model for Improved Iron Loss Estimation of Complex Flux Waveforms

Simulation of Losses in Dc-Biased Single Phase Three Limb Transformer

Analysis of the Relationship Between the Loss of the Three-Phase Five-Limb Transformer and GIC

A Practical Hybrid Hysteresis Model for Calculating Iron Core Losses in Soft Magnetic Materials

Predicting Iron Losses in Laminated Steel with Given Non-Sinusoidal Waveforms of Flux Density

Reconsideration of Nonphysical Solution in Jiles–Atherton Model for Real-Time Hysteresis Estimation

ANALYSIS OF ELECTROMAGNETIC FIELDS AND EDDY CURRENT LOSSES IN LARGE POWER TRANSFORMERS

Harmonic and DC Bias Hysteresis Characteristics Simulation Based on an Improved Preisach Model