Abstract:Magnetic eddy current losses is significant in permanent magnet motors, especially in high-power density permanent magnet motors. It significantly affects the magnet’s temperature and properties and may cause irreversible demagnetization. Several methods for reducing magnetic eddy current losses is proposed to address these problems. First, a field-circuit coupled mathematical model was established to calculate the magnetic eddy current losses. Experiments on the phase current and magnetic eddy current losses verify the accuracy of field-circuit coupled mathematical model. Then based on the model, the effect of the trigger angle, slot opening width, pole arc coefficient, pole arc center offset, and auxiliary slots on the magnetic eddy current losses were assessed. The results showed that the magnetic eddy current loss could be reduced by choosing a suitable leading trigger angle, pole arc coefficient, and pole arc center offset. A smaller slot opening width reduced the eddy current losses. A novel auxiliary slot with an optimized size is proposed to reduce eddy current losses. Finally, taking the trigger angle, slot opening width, pole arc coefficient, pole arc center offset and the auxiliary groove as the optimization factors and the magnetic eddy current loss as the optimization target, the optimal parameter scheme is obtained by Taguchi method. The simulation results show that the optimized magnetic eddy current losses is reduced by 8.57%.

A modified jiles-atherton model for estimating the iron loss of electrical steel considering DC bias

Predicting Iron Losses in Soft Magnetic Materials under DC Bias Conditions Based on Steinmetz Premagnetization Graph

Iron Loss Model Under DC Bias Flux Density Considering Temperature Influence

Study on Influence of Processing Methods on Loss Coefficients of Iron Loss Model

A Novel Loss Calculation Method of Electrical Steel Sheet under DC Bias Based on Tellinen Model

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

A comparative study of J–A and Preisach improved models for core loss calculation under DC bias

Predicting Iron Losses in Laminated Steel with Given Non-Sinusoidal Waveforms of Flux Density

Characterization and Modeling of Soft Magnetic Materials for Improved Estimation of PWM-Induced Iron Loss

Iron Loss Separation in High Frequency Using Numerical Techniques

Hybrid Analytical Model for Predicting the Electromagnetic Losses in Surface-Mounted Permanent-Magnet Motors

A Dynamic Hysteresis Model for Loss Estimation of GO Silicon Steel Under DC-Biased Magnetization

Dynamic Hysteresis Loss Model of Power Transformer under DC Current Biasing and Its Verification

Loss Calculation of Iron Core under DC Bias and Harmonic Disturbance Conditions

A Simplified Iron Loss Model for Laminated Magnetic Cores

Investigation and Prediction of High-Frequency Iron Loss in Lamination Steels Driven by Voltage-Source Inverters Using Wide-Bandgap Switches

Reconsideration of Nonphysical Solution in Jiles–Atherton Model for Real-Time Hysteresis Estimation

A Practical Hybrid Hysteresis Model for Calculating Iron Core Losses in Soft Magnetic Materials

Piecewise Variable Parameter Loss Model of Laminated Steel and Its Application in Fine Analysis of Iron Loss of Inverter-Fed Induction Motors