Abstract:Magnetic eddy current losses is significant in permanent magnet motors, especially in high-power density permanent magnet motors. It significantly affects the magnet’s temperature and properties and may cause irreversible demagnetization. Several methods for reducing magnetic eddy current losses is proposed to address these problems. First, a field-circuit coupled mathematical model was established to calculate the magnetic eddy current losses. Experiments on the phase current and magnetic eddy current losses verify the accuracy of field-circuit coupled mathematical model. Then based on the model, the effect of the trigger angle, slot opening width, pole arc coefficient, pole arc center offset, and auxiliary slots on the magnetic eddy current losses were assessed. The results showed that the magnetic eddy current loss could be reduced by choosing a suitable leading trigger angle, pole arc coefficient, and pole arc center offset. A smaller slot opening width reduced the eddy current losses. A novel auxiliary slot with an optimized size is proposed to reduce eddy current losses. Finally, taking the trigger angle, slot opening width, pole arc coefficient, pole arc center offset and the auxiliary groove as the optimization factors and the magnetic eddy current loss as the optimization target, the optimal parameter scheme is obtained by Taguchi method. The simulation results show that the optimized magnetic eddy current losses is reduced by 8.57%.

Study on Influence of Processing Methods on Loss Coefficients of Iron Loss Model

Influence of Rotor Configuration on Iron and Magnet Losses of Fractional-Slot IPM Machines

Iron Loss Separation in High Frequency Using Numerical Techniques

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Predicting Iron Losses in Laminated Steel with Given Non-Sinusoidal Waveforms of Flux Density

A New Iron Loss Model for Temperature Dependencies of Hysteresis and Eddy Current Losses in Electrical Machines

Influence of temperature on magnetic properties of silicon steel lamination

Iron Loss Analysis of High-Speed AFPM Motor with Ultra-Thin Silicon Steel Considering Bending Stress

Piecewise Variable Parameter Loss Model of Laminated Steel and Its Application in Fine Analysis of Iron Loss of Inverter-Fed Induction Motors

Prediction of iron losses using the modified Steinmetz equation under the sinusoidal waveform

An improved eddy current loss model over broadband frequency range

Soft magnetic material degradation due to manufacturing process: A comparison of measurements and numerical simulations

Impact of a Punching Process on the SyRM Iron Loss: SPICE Model as an Effective Tool for Iron Loss Modeling

A New High-Frequency Iron Loss Model Including Additional Iron Losses due to Punching and Burrs’ Connection

Characterization and Modeling of Soft Magnetic Materials for Improved Estimation of PWM-Induced Iron Loss

Study on Iron Loss in Two Kinds of Moving-magnet Linear Motors

Iron Loss Model for Rotating Machines Using Direct Eddy Current Analysis in Electrical Steel Sheets

A Simplified Iron Loss Model for Laminated Magnetic Cores

Evaluation of Iron Loss Models in Electrical Machines