Abstract:When HVDC system operates in monopolar mode and uses the earth as a return path,the electrode current with the magnitude of several kiloamperes can cause significant potential difference between different locations.Meanwhile,there may be direct currents flowing through the power transformers with neutral points grounded,which results in a series of harmful consequences.Under heavy saturation due to DC bias,lots of magnetic flux will be pushed out of the iron core and pass through leakage paths consisting of insulation media and metal parts.Taking the example of a simplified power system with a 105 MVA/220 kV three-phase three-limb transformer,some simulation results regarding the estimation of Manapouri transformer performance for no load case when HVDC earth return current is presented.Instead of using either a branch impedance or an admittance matrix to represent the iron core of transformer,the coupled electromagnetic method based on the core topology is adopted and a three-phase three-limb transformer model has been established.It can represent transformer characteristics very accurately with properly decided parameters.In this model, the loop equations which relate the loop flux to the externally applied magnetomotive forces with reluctances as coefficients are obtained.The effects of transformer leakage paths are modelled by constant magnetic reluctances and discussed in detail.The results with different magnitudes of these leakage reluctances show that the characteristics of leakage paths would influence the immunity of three-phase three-limb transformer from DC biasing current.Since such type of transformer will also be affected by DC biasing current when the reluctances of leakage paths are not large enough,the leakage paths should be considered carefully during the design and manufacture of power transformer.

Research on Testing of Over-exciting to Evaluate the Tolerated DC Currents of Transformers

The No-Load Performance of 3-Phase Transformer Bank under Direct-Current Bias Based on the 3d Transient Analysis

Research on the Withstand Performance of Three-phase Three-limb Power Transformer under DC Current Biasing

Analysis and Optimized Suppression of DC Bias in Large AC Power Grid

Simulation and Analysis of Electromagnetic Properties at the Secondary Port of Electronic Current Transformers Under Very Fast Transient Overvoltage

Experiments and simulation analysis of 500kV single-phase three-column transformer in No-load under DC bias

Experimental Study On Dc Biasing Impact On Transformer'S Vibration And Sound

A Comprehensive Coupled Methodology for Calculation and Suppression of DC Bias in UHVDC Transmission Systems

Vibration characteristic analysis of transformers influenced by DC bias based on vibration half-wave energy method

Magnetic Flux Bias Compensation Based on Voltage Injection Method With an Auxiliary DC/DC Converter

Study on the Influence of HVDC System Grounding Electrode Current on Power Transformer Operation

Vibration and Audible Noise Characteristics of AC Transformer Caused by HVDC System under Monopole Operation

Research on power transformer vibration and noise under DC bias condition

Field Monitoring and Analysis on Vibration and Noise of 500 Kv Electrical Transformer under DC Current Biasing

Characteristic Extraction and Assessment Methods for Transformers DC Bias Caused by Metro Stray Currents

Analysis and Simulation of Transformer DC Bias and Measures of Suppression in Hami Region

Electromagnetic Vibration Characteristics of High-Frequency Transformer under DC Bias with Different Winding Structures

Analysis and Countermeasure Study on DC Bias of Main Transformer in a City

High-current Arc Test and Characteristic Research in Converter Transformer

Effect of DC Magnetic Biasing on the Temperature Rise of High-voltage Winding of Power Transformer

On the DC Transient Overvoltage in the Converter Stations of ±800 Kv Xiluodu Zhexi HVDC Project