Abstract:When HVDC system operates in monopolar mode and uses the earth as a return path,the electrode current with the magnitude of several kiloamperes can cause significant potential difference between different locations.Meanwhile,there may be direct currents flowing through the power transformers with neutral points grounded,which results in a series of harmful consequences.Under heavy saturation due to DC bias,lots of magnetic flux will be pushed out of the iron core and pass through leakage paths consisting of insulation media and metal parts.Taking the example of a simplified power system with a 105 MVA/220 kV three-phase three-limb transformer,some simulation results regarding the estimation of Manapouri transformer performance for no load case when HVDC earth return current is presented.Instead of using either a branch impedance or an admittance matrix to represent the iron core of transformer,the coupled electromagnetic method based on the core topology is adopted and a three-phase three-limb transformer model has been established.It can represent transformer characteristics very accurately with properly decided parameters.In this model, the loop equations which relate the loop flux to the externally applied magnetomotive forces with reluctances as coefficients are obtained.The effects of transformer leakage paths are modelled by constant magnetic reluctances and discussed in detail.The results with different magnitudes of these leakage reluctances show that the characteristics of leakage paths would influence the immunity of three-phase three-limb transformer from DC biasing current.Since such type of transformer will also be affected by DC biasing current when the reluctances of leakage paths are not large enough,the leakage paths should be considered carefully during the design and manufacture of power transformer.

Effect of DC Magnetic Biasing on the Temperature Rise of High-voltage Winding of Power Transformer

ELECTROMAGNETIC AND THERMAL CHARACTERISTICS SIMULATION FOR THREE-PHASE THREE-LIMB TRANSFORMERS UNDER DC MAGNETIC BIAS

Iron Loss and Temperature Rise Analysis of a Transformer Core Considering Vector Magnetic Hysteresis Characteristics under Direct Current Bias

Magnetic Flux Bias Compensation Based on Voltage Injection Method With an Auxiliary DC/DC Converter

Simulation and Experiment Research on the Effects of DC-Bias Current on the 500kV Power Transformer

Analysis of Excitation Characteristics of Transformers with Different Core Shapes under Severe DC Bias

ANALYSIS OF ELECTROMAGNETIC FIELDS AND EDDY CURRENT LOSSES IN LARGE POWER TRANSFORMERS

Research on power transformer vibration and noise under DC bias condition

Electromagnetic Vibration Characteristics of High-Frequency Transformer under DC Bias with Different Winding Structures

Numerical Study on Temperature Rise and Mechanical Properties of Winding in Oil-Immersed Transformer

Design of Power Supply for Testing on Power Transformer of DC Bias

Thermal-fluid field coupling simulation and characteristic analysis on internal temperature of oil-immersed transformers

Research on the Withstand Performance of Three-phase Three-limb Power Transformer under DC Current Biasing

3D FEM Simulation Study of a Single-Phase Three-Limb Transformer under DC Bias

Magnetic-Thermal-Flow Field Coupling Simulation of Oil-Immersed Transformer

Based on Optimized Mag-thermal Coupling Method Simulation Research on Temperature Rise of Switching Power Transformer

Research on temperature distribution characteristics of oil‐immersed power transformers based on fluid network decoupling

Temperature simulation of oil-immersed transformerbased on fluid-thermal coupling

Experimental Study On Dc Biasing Impact On Transformer'S Vibration And Sound

Electromagnetic Field Analysis and Optimization Method of High-Temperature Superconducting Transformer under the Influence of Abnormal Voltage

Research on temperature rise calculation and hot spot temperature inversion method for oil immersed transformer based on magnetic - thermal - fluid