Abstract:Doping concentration and thickness of an epitaxy layer are the most essential parameters for power devices. The conventional algorithm extracts these two parameters by calculating the doping profile from its capacitance-voltage (C–V) characteristics. Such an algorithm treats the device as a parallel-plane junction and ignores the influence of the terminations. The epitaxy layer doping concentration tends to be overestimated and the thickness underestimated. In order to obtain the epitaxy layer parameters with higher accuracy, a new algorithm applicable for devices with field limited ring (FLR) terminations is proposed in this paper. This new algorithm is also based on the C–V characteristics and considers the extension manner of the depletion region under the FLR termination. Such an extension manner depends on the design parameters of the FLR termination and is studied in detail by simulation and modeling. The analytical expressions of the device C–V characteristics and the effective doping profile are derived. More accurate epitaxy layer parameters can be extracted by fitting the effective doping profile expression to the C–V doping profile calculated from the C–V characteristics. The relationship between the horizontal extension width and the vertical depth of the depletion region is also acquired. The credibility of the new algorithm is verified by experiments. The applicability of our new algorithm to FLR/field plate combining terminations is also discussed. Our new algorithm acts as a powerful tool for analyses and improvements of power devices.

High Performance Termination of Power Devices with Multi-epi Method

Ultra-high voltage device termination using the 3D RESURF (super-junction) concept - experimental demonstration at 6.5 kV

Theoretical Study of an Effective Field Plate Termination for SiC Devices Based on High-k Dielectrics

Hybrid Junction Termination Consisting of a Variation Lateral Doping Structure and a Spiral Polysilicon Resistive Field Plate

Fabrication and Optimization of a High-Reliability 700 V Super-Junction MOSFET with Segmented P-Buried RESURF Termination

Novel High-Tolerance Termination with Resistive Field Plate for 600 V Super-Junction Vertical Double-Diffused MOSFET

Deep-Trench Termination of Bipolar RF Power Devices

Etched Junction Termination Extension With Floating Guard Rings And Middle Rings For Ultrahigh-Voltage 4h-Sic Pin Diodes

Design and Characteristics of an Etching Field Limiting Ring for 10kv SiC Power Device

A Near Ideal Edge Termination Technique for Ultrahigh-Voltage 4H-Sic Devices with Multi-Zone Gradient Field Limiting Ring

Deep Trench Junction Termination Employing Variable-K Dielectric For High Voltage Devices

High Voltage SiC JBS Diodes with Multiple Zone Junction Termination Extension Using Single Etching Step

Design and Optimization of Planar Mesa Termination for Diamond Schottky Barrier Diodes

Evaluation of Termination Techniques for 4H-Sic Pin Diodes and Trench JFETs

An Effective High-Voltage Termination for Sic Planar Pn Junctions for Use in High-Voltage Devices and Uv Detectors

(Invited) Three-Section Adjusted Field Limited Rings Applicable for SiC 2200V Power MOSFETs

A New Edge Termination Technique for High-Voltage Devices in 4H-Sic–multiple-floating-zone Junction Termination Extension

An Improved Composite JTE Termination Technique for Ultrahigh Voltage 4H-Sic Power Devices

A New Algorithm Based on C–V Characteristics to Extract the Epitaxy Layer Parameters for Power Devices with the Consideration of Termination

Breakdown Characteristic of Multiregion Double RESURF LDMOS with High Voltage Interconnection

Edge Termination Design of a 700-V Triple RESURF LDMOS with N-Type Top Layer